Table of Contents
Advertisement
Other Ceiling:
Please refer to the figure below:
1.
By using the holes A on the ceiling bracket, identify and mark correct
screw positions of the desired mounting location.
2.
Where necessary, drill a hole on each of the marked screw positions.
3.
Insert the anchors G into the holes (use a screw driver where necessary)
at the marked screw positions.
4.
Fix the ceiling mount bracket to the desired location by inserting the
ceiling fixing screws B through the bracket ceiling holes A. Tighten the
ceiling fixing screws B onto the anchors G using a screw driver to fix the
bracket to the ceiling.
5.
Fix the bracket rail screws C into the holes D on the device using a
screw driver. The cap of the screws should be protruding outwardly
from the holes D.
6.
Insert the bracket rail screws C into the device fixing holes E.
7.
Twist the device as the bracket rail screws C slide through the bracket
rail F.
Twist the device all the way until you feel that it is fixed in position.
10
Advertisement
Table of Contents
