Table of Contents
Advertisement
Multicast
Set the transfer rate for multicast packets or use the "Auto"
Rate
setting.
Tx Power
Set the power output of the wireless radio. You may not
require 100% output power. Setting a lower power output can
enhance security since potentially malicious/unknown users
in distant areas will not be able to access your signal.
Beacon
Set the beacon interval of the wireless radio. The default
Interval
value is 100.
Station idle
Set the interval for keepalive messages from the AP to a
timeout
wireless client to verify if the station is still alive / active.
WDS Settings
WDS
A wireless distribution system (WDS) is a system enabling the
Functionality
wireless interconnection of APs in an IEEE 802.11 network. It
allows a wireless network to be expanded using multiple APs
without the traditional requirement for a wired backbone to
link them.
AP Device
Set AP Device Name.
Name
MAC Address Set MAC Address of AP.
WDS VLAN
Enable / Disable VLAN function.
Mode
WDS VLAN ID Set VLAN ID of WDS.
WDS
Set WDS Encryption.
Encryption
129
Advertisement
Table of Contents
