Table of Contents
Advertisement
Wireless
Enable or disable the AP's 5GHz wireless radio. When disabled,
no 5GHz SSIDs will be active.
Band
Wireless standard used for the AP.
Combinations of 802.11a, 802.11n & 802.11ac can be selected.
Enable SSID
Select how many SSIDs to enable for the 2.4GHz frequency
Number
from the drop down menu. A maximum of 16 can be enabled.
SSID#
Enter the SSID name for the specified SSID (up to 16). The SSID
can consist of any combination of up to 32 alphanumeric
characters.
VLAN ID
Specify a VLAN ID for each SSID.
Auto
Enable/disable auto channel selection. Auto channel selection
Channel
will automatically set the wireless channel for the AP's 5GHz
frequency based on availability and potential interference.
When disabled, configurable fields will change as shown
below:
Auto
Select a range to which auto channel selection can choose
Channel
from.
Range
Auto
Select a time interval for how often the auto channel setting
Channel
will check/reassign the wireless channel.
Interval
Check/uncheck the "Change channel even if clients are
connected" box according to your preference.
Channel
Select the channel bandwidth:
Bandwidth
20MHz (lower performance but less interference); or
Auto 40/20 MHz; or
Auto 80/40/20 MHz (automatically select based on
interference level).
BSS
Set a Basic Service Set (BSS) rate: this is a series of rates to
BasicRateSet
control communication frames for wireless clients.
200
Advertisement
Table of Contents
