Related Manuals for skyvoe NXG-65
Summary of Contents for skyvoe NXG-65
- Page 1 NXG-65 / NXG-70 / NXG-80 Ceiling Tilt Mount Installation Manual Fixed Adjustable Adjustable or Fixed Ceiling Mount Columns should be fully assembled and secured to the ceiling prior to the following the instructions in this manual.
-
Page 3: Tools Required For Installation
Included in the tilt mount kit: 2- Mounting Arms 2- Locking Bars 1- Mounting Plate Additional Parts Needed: These parts are found in the supplied Ceiling Mount Parts (CMP-1) box. 4 qty. 8 qty. 4 qty. 5/16” Hex Head Bolts SS Flat Washers 5/16”... - Page 4 Installation Manual - Tilt Mounts Lay blanket down on flat sturdy surface. Run hand over surface to make sure there are no sharp object or protrusions, when the television is laying down. Lay television down, viewing side down on blanket. Gather the clamping nuts with springs.
- Page 5 Remove the hex head screws and washers. Set the screws and washers in a secure location. Insert spring nuts as shown in picture (2 per power strut). Spring should be touching both sides of the power strut as shown. Align holes of the mounting arms with the holes of the clamp nut springs.
- Page 6 Installation Manual - Tilt Mounts Adjustable or Fixed Ceiling Mount Columns should be fully assembled and secured to ceiling prior to the following steps. Locate lower mounting plate. Align holes from Tilt Mount Plate to Column Mounting Plate. Listed parts are found in the supplied Ceiling Mount Parts (CMP-1) box.
- Page 7 Listed parts are found in the supplied Ceiling Mount Parts (CMP-1) box. • 4 - SS Flat Washers • 4 - 5/16” NyLock Nuts On the back of the mount, place the 4 provided flat washers and 4 provided NyLock nuts on exposed bolt threads.
- Page 8 Installation Manual - Tilt Mounts With the help from a friend, lift the television and attach the hooks on the mounting arms to the plate on the tilt mount. Tighten knobs on arms once the tilt is set correctly for the television. Once the television is hung on the plate.
- Page 9 Notes: nXG 6550 / 7070 / 8070 nstallatIon anual...
Need help?
Do you have a question about the NXG-65 and is the answer not in the manual?
Questions and answers