Selecting A Cycle; Using Delay Start; The Reset Options Button - Whirlpool DU8000XR Series Use & Care Manual

Selecting a cycle
DELAY WASH SIGNAL LIGHT
POTS 8 PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145 F (63'C) in both
washes and the last rinse (marked '1,
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled
loads. Cycle time is about 75
minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads.
[The Energy Guide Label data is
based on this cycle.) Cycle time is
about 65 minutes.
LOW ENERGY WASH Cycle
For pre-rinsed or lightly soiled
loads. Cycle time is about 60
minutes.
RINSE & HOLD Cycle
For rinsing a few items to be
washed one or more days later.
Cycle time is about 15 minutes.
Use AIR DRY only. Do not use HI-TEMP WASHING Option.
Using DELAY START
4. Close and latch the door. The DELAY WASH
I. Push desired Clean Selector Button.
Signal Light will come on until the selected
cycle starts.
2. Push desired Option Selector Buttons.
NOTES:
3. Turn Control Knob clockwise to the number of
l
You can add items while time is counting
hours (from 1 to 6 hours] you want the dish-
down. Close and latch the door. The timer will
washer to delay before the selected cycle
not advance if the door is unlatched.
starts.
l
RINSE & HOLD and LOW ENERGY WASH Cvcles
can't be delayed.
The RESET OPTIONS Button
If you want to change a selected option, push the RESET OPTIONS Button. Re-select an
option, if desired. 9