Ballast - Kioti DK55 Manual

BALLAST

SELECTING FRONT BALLAST
Add weight to front end if needed for
stability. Heavy pulling and heavy rear
mounted implements tend to lift front
wheels. Add enough ballast to maintain
steering control and prevent tip over.
Remove weight where it is no longer
needed. Front weights are available from
your KIOTI Dealer. Your dealer can help
you decide how much is required for your
particular application.
CAUTION
Additional ballast may be needed
for transporting heavy integral
implements. When implement is
raised, drive slowly over rough
ground, regardless of how much
ballast is used.
Maximum 27 kg X 10 Pieces
weight
(59.5 lbs. X 10 Pieces)
SELECT REAR BALLAST CAREFULLY
Add weight to rear wheels if needed to
improve traction or for stability. Amount
of rear ballast should be matched to job
and ballast should be removed when it
is not needed. Rear wheel weights are
available or liquid may be added to the
tires. Consult your KIOTI Dealer for the
correct ballasting necessary for your
particular application.
CAUTION
Additional ballast may be needed
for transporting heavy integral
implements. When implement is
raised, drive slowly over rough
ground, regardless of how much
ballast is used.
Maximum 50kg X 1 Pieces
weight (110.2lbs. X 1Pieces)
WHEELS, TIRES AND TREAD 8-5