Harvia sentiotec Basic CORNER Installation Instructions Manual page 33

Instructions for installation and use
Repeat this with the right and left side wall.
6 screws 5 x 80 mm
Check that the wall elements are at right angles before screwing them
together. Observe the tip on page 4.
Mounting the upper wall elements
When assembling the upper sections, again start with the rear wall. Make sure
the connecting strips of the lower wall elements are flush.
Screw both sides of the upper rear wall to the projecting strip of the lower rear
wall. 2 screws 5 x 80 mm
p. 9/24
EN