Before Using For The First Time; Performing The Initial Configura- Tion; Water Softening System; Overview Of Water Hardness Settings - Bosch SPS2IKW04G User Manual

en Before using for the first time
Setting
2 max. ø
3 max. ø

Before using for the first time

Before using for the
first time
Configure the settings for initial start-
up.
Performing the initial configura-
tion
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→ "Home Connect quick start",
Page 35
Requirement: The appliance has
been installed and connected.
→ Page 11
Add special salt. → Page 23
1.

Overview of water hardness settings

You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hard- Hardness
ness value range
°E
0 - 8 Soft
9 - 20 Medium
21 - 26 Hard
27 - 44 Hard
22
Top basket
24.5 cm
27 cm
mmol/l Setting
0 - 1.1 0
1.2 - 2.9 1
3.0 - 3.7 2
3.8 - 6.2 3
Bottom basket
27.5 cm
25 cm
Add rinse aid. → Page 25
2.
Switch on the appliance.
3.
→ Page 30
Setting the water softening system.
4.
→ Page 23
Set the amount of rinse aid to be
5.
dispensed. → Page 25
Tip: You can change these settings
and other Basic settings → Page 33
at any time.

Water softening system

Water softening system
Hard water leaves limescale on the
tableware as well as the washing
tank and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
LED A
→ Page 15
LED B LED C
→ Page 15 → Page 15