Home Connect - Bosch SPS2IKW04G User Manual

en Home Connect
Press repeatedly until the
4.
LEDs show the right value.
If LED A → Page 15 is not lit, Extra
Dry is switched off.
If LED A → Page 15 is lit, Extra Dry
is switched on.
To save the settings, press
5.
for 3 seconds.
Set Wi-Fi
Press ⁠ .
1.
To open the appliance settings,
2.
press
flashes in the display.
a
Press
3.
and flash in the display.
Press repeatedly until the
4.
LEDs show the right value.
If LED A → Page 15 is not lit, the
wireless network connection is
switched off.
If LED A → Page 15 is lit, the wire-
less network connection is
switched on.
To save the settings, press
5.
for 3 seconds.
Set remote start
Press ⁠ .
1.
To open the appliance settings,
2.
press
flashes in the display.
a
Press
3.
flashes in the display.
Press repeatedly until the
4.
LEDs show the right value.
If LED A is lit, remote start is per-
manently deactivated.
If LED A and B LED are lit, remote
start can be selected via the re-
mote start button.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
34
for 3 seconds.
repeatedly until
for 3 seconds.
repeatedly until
If LED A, LED B and LED C are lit,
remote start is permanently activ-
ated.
The factory setting is level 2 (LED
A and LED B → Page 15).
To save the settings, press
5.
for 3 seconds.
Restoring factory settings
Press ⁠ .
1.
To open the appliance settings,
2.
press
flashes in the display.
a
Press
3.
and flash in the display.
Press to set the appliance
4.
back to the factory settings.
a The appliance is reset.
Home Connect
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
¡ → "Connecting the appliance to
WLAN home network (Wi-Fi)",
Page 35
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
for 3 seconds.
repeatedly until
1
,
)