Table of Contents
Advertisement
Water temperature
tips
Hot water dissolves and activates the
diihwashing
detergent. Hot water also
dissolves grease on dishes and helps dry
glasses spot-free. Use the Hi-Temp option if
you keep your water heater at a low setting.
For best dishwashing
results, water must
be at least 120°F (49°C) as it enters the
dishwasher.
To check
water
temperature
1. Run hot water at the faucet closest to
your dishwasher.
Let the water run for at
least one minute.
2. Measure the water temperature
with a
candy or meat thermometer.
Put the
thermometer
in the running stream
of water.
3. If the water temperature
at the faucet is
below 120°F (49°C) have a qualified
person raise the water heater's thermo-
stat setting.
Energy
saving
tips
You can help save energy if you:
l
Wash full loads. Running a half-filled
dishwasher
uses the same amount of
electricity and hot water as a fully loaded
machine.
l
Use the Low Energy Cycle whenever
possible. The cycle uses less hot water
and energy than the Normal cycle.
l
Use the Air Dry option when you don't
need a rapid drying cycle. Allow longer
drying times (overnight).
Use a rinse agent
to improve drying.
l
Do not use the Hi-Temp Wash option.
When this option is off, the dishwasher
will
not pause to heat water to 135°F (57°C)
during the main wash.
NOTE: Loads may not wash as well if the
water temperature
is too low.
l
Load correctly for best washing resutts.
Incorrect loading may cause poor washing
and the need to rewash all or part of
the load.
l
Do not pre-rinse normally soiled dishes.
Select the correct cycle for the load and
use the recommended
amount of detergent
for good washing results without hand
rinsing.
l
Use the delay feature to run your dish-
washer during off-peak hours. Local
utilities recommend this to avoid heavy
usage of energy at certain times of day.
17
Advertisement
Table of Contents
