High Pressure Operation - Pyle Pure Clean SLPRWAS58 User Manual

High Pressure Operation

CAUTION
Keep a distance of at least 30 cm when using the jet for cleaning painted surfaces to avoid damage.
CAUTION
Make sure the switch is set to "OFF/ON" and insert the plug into a properly installed socket.
ATTENTION
• The washer must be used on a secure and stable surface in a standing, upright position.
Connect the product to power and water supply as described.
• Open the water supply
• Hold the spray gun with both hands.
• Direct the nozzle of the chosen accessory away from you towards the surface to be cleaned.
• Unlock the trigger and press it until a constant amount of water flows through the nozzle, to allow air
trapped in the hose to escape.
• Release the trigger.
• Turn on the switch "OFF/ON".
• Hold the spray gun with both hands. Direct the water jet to the object to be cleaned and press the
trigger.
Release the lever of the trigger gun; the device will switch off again and stop the water jet. High pres-
sure remains in the system.
WARNING! Beware of kickback when pressing the trigger!
www.PyleUSA.com