Frost Protection - Pyle Pure Clean SLPRWAS58 User Manual

Frost Protection

ATTENTION
Appliance and accessories that are not completely drained can be destroyed by frost.
Completely drain appliance and accessories and protect them against frost.
To avoid damage:
• Detach the appliance from the water supply.
• Detach spray lance from the trigger gun.
• Turn on the appliance "ON/OFF".
• Push the lever of the trigger gun until no more water is escaping.
• Release the lever of the trigger gun.
• Lock the lever of the trigger gun.
• Turn off the appliance "ON/OFF".
• Store the appliance and the entire accessories in a frost free room.
Care and maintenance
DANGER
Risk of electric shock
Prior to all work on the appliance, switch off the appliance and pull the power plug.
High pressure hose
The high pressure hose is specially constructed with reinforced walls than can be easily damaged and
should be stored carefully.
• Do not kink.
• Do not drive vehicles over the hose.
• Do not expose the hose to sharp edges or corners. Misuse will lead to ballooning or premature
failure and will invalidate warranty.
Clean the sieve in the water connection
Clean the sieve in the water connection regularly.
Remove coupling from the water connection, and rinse with warm water to prevent any foreign matter
from clogging the pump.
Clean the nozzle with the needle clean-out tool provided. Remove the spray wand from the gun.
www.PyleUSA.com