Chapter 2
Turning On and Off DCU 220
Turning On
Press the power button (
Turning Off
When you finish a working session, you can stop the system by turning off the power or
leaving it in Sleep or Hibernation mode:
To..
Power off
(Shutdown)
Sleep
Hibernate
* "Sleep" is the default setting of the power button. You may change what the power button
does in Windows Control Panel.
Robert Bosch GmbH
Turning On and Off DCU 220 | DCU 220 | 7 | en
).The Windows operating system should start.
Use the Windows Start menu in the lower left and
follow the shutdown procedure.
Press the power button* or use the Windows Start
menu to put DCU 220 in Sleep mode.
Use the Windows Start menu to put DCU 220 in
Hibernation mode.
Do this
1 689 989 330 | 2016-11-30