Connecting To A Wlan Network - Bosch DCU 220 User Manual

Connecting to a WLAN Network

1.
Make sure that the WLAN function is enabled (as described above).
2.
Tap the Wireless Network icon
3.
In the list of available wireless networks, tap a network, and then tap Connect.
4.
Some networks require a network security key or passphrase. To connect to one of
those networks, ask your network administrator or Internet service provider (ISP) for
the security key or passphrase.
For more information on setting a wireless network connection, refer to Windows online
help.
NOTE: You can use Intel® PROSet Wireless to take full advantage of the Wi-Fi capabilities
of your computer. See the Help of the utility for instructions.
Robert Bosch GmbH
Operating DCU 220 | DCU 220 | 21 | en
on the taskbar.
1 689 989 330 | 2016-11-30