Table of Contents
Advertisement
Quick Links
Dear Customer
Congratulations! You have purchased a pool of superior quality and durability. To achieve the best possible results,
follow the instructions carefully. Failure to follow the installation procedures may result in damage to your pool or
property and void your warranty. We recommend that you make a preliminary study of the instruction booklet to
familiarize yourself with the different parts of your pool. Make sure that you understand each step thoroughly before
you begin assembling.
WARNING: Be sure you have read and understand the "Safety Information" sheets
before you begin your pool installation.
WARNING: For your safety, your pool is not designed for diving and/or jumping head first.
1
Chart 1.1 - Grass removal area (Figure 1.1)
TRUE POOL SIZE
2.46 x 4.14 m (8' 1"x 13' 7")
2.46 x 4.72 m (8' 1"x 15' 6")
2.46 x 5.82 m (8' 1"x 19' 1")
3.05 x 4.72 m (10' x 15' 5-3/4")
3.05 x 5.53 m (10' x 18' 2-1/2")
3.05 x 6.38 m (10' x 20' 11-1/8")
3.65 x 5.63 m (11' 11-1/2"x 18' 6")
3.65 x 7.30 m (11' 11-1/2"x 23' 11-1/2")
3.65 x 8.12 m (11' 11-1/2"x 26' 8-1/4")
3.96 x 5.17 m (13' x 16' 11-3/4")
3.96 x 6.83 m (13' x 22' 5")
4.29 x 5.97 m (14' 1"x 19' 7")
4.29 x 7.65 m (14' 1"x 25' 1")
4.57 x 5.99 m (15' x 19' 8")
4.57 x 7.65 m (15' x 25' 1-3/8")
4.57 x 9.33 m (15' x 30' 7-1/4")
4.85 x 8.08 m (15' 11"x 26' 6")
4.85 x 9.75 m (15' 11"x 32' )
5.44 x 10.00 m (17' 10" x 32' 10")
5.44 x 11.61 m (17' 10" x 38' 4")
5.44 x 13.36 m (17' 10" x 43' 10")
When selecting the site for your pool, take into account city by-laws regarding fences and utilities laws pertaining to electrical cables
as well as the landscaping which you are planning once the pool is installed.
Please do not dive. Diving may result in permanent injury or death.
SITE PREPARATION
DISTANCE (A-B)
MODEL
8'x14'
1.68m (5'-6")
8'x16'
2.45m (7'-5")
8'x19'
3.35m (11'-0")
10'x16'
1.68m (5'-6")
10'x18'
2.45m (8'-3")
10'x21'
3.35m (11'-0")
12'x18'
1.98m (6'-6 1/2")
12'x24'
3.65m (12'-0")
12'x27'
4.47m (14'-8")
13'x17'
1.18m (3'-10 1/2")
13'x23'
2.84m (9'-3 3/4")
14'x20'
1.68m (5'-6")
14'x25'
3.35m (11'-0")
15'x20'
1.42m (4'-7 3/4")
15'x26'
3.07m (10'-1")
15'x31'
4.75m (15'-7")
16'x26'
3.23m (10'-7 1/2")
16'x32'
4.90m (16'-1")
18'x33'
4.57m (15'-0")
18'x38'
6.25m (20'-6")
18'x44'
7.92m (26'-0")
ASSEMBLY INSTRUCTIONS
We wish you a most pleasant and refreshing summer.
RADIUS (R)
WIDTH (D)
2.75m (9')
1.40m (4'7 1/2")
2.75m (9')
1.40m (4'7 1/2")
1.40m (4'7 1/2")
2.75m (9')
1.70m (5'7")
3.35m (11')
1.70m (5'7")
3.35m (11')
1.70m (5'7")
3.35m (11')
1.98m (6'6 3/4")
3.96m (13')
3.96m (13')
1.98m (6'6 3/4")
1.98m (6'6 3/4")
3.96m (13')
2.13m (7')
4.27m (14')
4.27m (14')
2.13m (7')
4.57m (15')
2.31m (7'7 1/2")
2.31m (7'7 1/2")
4.57m (15')
2.44m (8')
4.88m (16')
4.88m (16')
2.44m (8')
2.44m (8')
4.88m (16')
5.18m (17')
2.59m (8'6 1/2")
2.59m (8'6 1/2")
5.18m (17')
5.79m (19')
2.90m (9'-6")
2.90m (9'-6")
5.79m (19')
5.79m (19')
2.90m (9'-6")
OVAL POOLS
MODEL NH
TOTAL LENGTH (E)
TRENCH (F)
4.45m (14'-7")
1.90m (6'-3 1/2")
5.03m (16'-6")
3.33m (10'-11")
6.12m (20'-1")
3.58m (11'-9")
5.03m (16'-5 3/4")
1.90m (6'-3 1/2")
5.85m (19-2 1/2")
3.33m (10'-11")
6.69m (21-11")
3.33m (10'-11")
5.94m (19'-6")
1.90m (6'-3 1/2")
7.59m (24'-11 1/2")
3.58m (11'-9")
8.43m (27'-8 1/4")
5.23m (17'-2 1/2")
5.48m (17'-11 3/4")
1.66m (5'-5 1/2")
7.14m (23'-5")
3.33m (10'-11")
6.27m (20'-7")
1.90m (6'-3 1/2")
7.95m (26'-1")
3.58m (11'-9")
6.30m (20'-8")
1.66m (5'-5 1/2")
7.96m (26'-1 1/2")
3.33m (10'-11")
9.64m (31'-7 1/4")
4.99m (16'-4 1/2")
8.38m (27'-6")
3.58m (11'-9")
10.05m (33')
5.23m (17'-2 1/2")
10.31m (33'-10")
5.24m (16'-4 1/2")
11.98m (39'-4")
6.90m (22'-8")
13.66m (44'-10")
8.56m (28'-1 1/2")
V0_2020-06-25
Advertisement
Table of Contents
Related Manuals for Cornelius NH
Summary of Contents for Cornelius NH
- Page 1 V0_2020-06-25 ASSEMBLY INSTRUCTIONS OVAL POOLS MODEL NH Dear Customer Congratulations! You have purchased a pool of superior quality and durability. To achieve the best possible results, follow the instructions carefully. Failure to follow the installation procedures may result in damage to your pool or property and void your warranty.
- Page 2 SITE PREPARATION (continued) 1) Drive a stake into the ground at points A and B respecting the Figure 1.1 distance of the straight section between those two points (A-B). 2) Draw two half circles respecting the radius (R). 3) Join the two half circles with straight lines respecting the width between these two lines (D).
- Page 3 BOTTOM DRAIN ASSEMBLY (if applicable) Dig a hole 30 cm (12") wide by approximately 25 cm (10") deep in the center of the circumference. From the center hole to the projected location of the pool motor, dig a 15 cm (6") wide trench. Place the removed soil aside to be used later to cover the hose.
- Page 4 STRAIGHT SECTION BUTTRESS ASSEMBLY (continued) 2) Refer to Illustration 4.2. Assemble the buttress post using 3) Refer to Illustration 4.3. Cover the bolt heads with bolt cap bolts 1/2" X 3" X #13 (12,7 mm X 76,2 mm) (U), nuts (UU) and covers (W) and insert the styrofoam block (X) at both ends of foot washers (V).
- Page 5 TENSION STRAPS ASSEMLBY 1) Study illustrations and chart carefully. You are now ready to as- Illustration 6.1 TENSION semble the metallic tension straps. Refer to indications on the chart STRAPS for the exact number of tension straps per row according to their respective pool size.
- Page 6 WALL INSTALLATION 1) Add sand. 2) Choose the filter location beside a round section (never in a straight section). The starting point should be at that location where SKIMMER HOLE the skimmer and return holes are, and as close as possible to the PUMP RETURN filtration system.
- Page 7 SAND BASE FINISHING You can now spread approximately 10 cm (4") of compacting sand all around the inside base of the wall in order to protect the liner WALL from the cutting edges of the bottom tracks and the stone dust (if 30 cm (12") applicable), or install a prefabricated cove if available.
- Page 8 VINYL LINER INSTALLATION (continued) Installation detail of a bead liner with top track. Fill the pool with water up to the base of the wall before stopping Hang the liner on the top of the wall and install the top track to se- and removing the vacuum cleaner.
- Page 9 TOP SEAT INSTALLATION Place the top seats on the top of the uprights. Center the top seat Secure the top seat in place using four (4) screws "Z" . between the two the uprights and be certain to evenly distribute the ledges all around.
- Page 10 LABEL FILTRATION SYSTEM ASSEMBLY Assemble skimmer, inlet, drain, filter, pumps, hoses according to separate manufacturer’s instructions. Note: See 'Safety Information" Manual.
- Page 11 PARTS LIST * SEE DRAWING PARTS NEXT PAGE ITEM DESCRIPTION POOL WALL (finished lenght, inch) BOLT & NUT FOR 52" (OR 54") WALL POOL LINER PLASTIC COUPLER (SOLD SEPARATELY) TOP SEAT - ROUND SECTIONS TOP SEAT- STRAIGHT SECTIONS BOTTOM PLATE UPRIGHT 52'' or UPRIGHT 54'' TOP PLATE - ROUND SECTION SEAT CAP...
- Page 12 PARTS LIST STRAIGHT SECTION ROUND SECTION...
- Page 13 SAFETY AND FUN GO TOGETHER! SAFETY INFORMATION Read this before installing your above-ground pool. 12 775, Brault Street, Mirabel, Quebec, Canada J7J 0C4 Phone: 1 800 44-TREVI (1 800 448-7384) Fax: 1 866 777-0167...
- Page 14 GENERAL INFORMATION The pool is subject to wear and deterioration if not maintained prop- We are not responsible for faulty installation of the pool, we are not erly. Certain types of excessive or accelerated deterioration can lead affiliated with any pool installer and assume no responsibility or lia- to failure of the pool’s structure, which may release large quantities bility for the purchaser’s or a professional installer’s errors in in- of water that could cause bodily harm, death and property damages.
- Page 15 USAGE SAFETY INFORMATION...