Ubiquiti LTU-Rocket Manual page 7

3.
WARNING:
Failure to do so can damage the unit and void the product warranty.
LTU Configuration
Access the LTU Configuration Interface for configuration. By default, Access Point
mode is already enabled for the LTU-Rocket. You can choose to configure
settings such as Link Name, Duty Cycle, Channel Bandwidth, and Frequency.
The PTMP stations will scan and find the LTU-Rocket and do not need any
frequency set as long as they are set with the same Channel Bandwidth and Link
Name.
Configuration Using Browser-Based Interface
1. Configure the Ethernet adapter on your computer with a static IP address on
the 192.168.1.x subnet.
2. Launch your web browser. In the address field, type: http://192.168.1.20
Then press enter (PC) or return (Mac).
Use only the included adapter, model POE-24V-5X-HD.