Table of Contents
Advertisement
2.1 DIP switch
#PIN
Function
1
RGB INPUT skip
CVBS1 MUTE
2
3
CVBS2 MUTE
CAN
4
5
OEM MUTE
INTERLACE
6
7
REAR MODE
SYNC ON GREEN
8
※ Please make sure to disconnect the power cable of the interface and reconnect
the power cable again to apply the dip switch setting whenever changing DIP switch.
Otherwise, DIP switch setting will not be applied.
DIP S/W selection
ON : Skipping RGB Mode
OFF : RGB Display
ON : Skipping CVBS1
OFF : CVBS1 Display
ON : Skipping CVBS2
OFF : CVBS2 Display
ON : When install to the Cayenne
OFF : When install to all of the car
ON : Skipping OEM
OFF : OEM Display
ON : Non-Interlace
OFF : Interlace
ON : External Rear Camera
OFF : OEM Rear Camera
ON : Sync On Green (RGSB)
OFF : Sync On Green Off
※DIP S/W Use Example
-. Use Input Mode : CVBS1, Navigation (RGB), Main
-. Rear Camera : When to be installed on CVBS 4
▷ DIP S/W : 1 OFF
▷ DIP S/W : 2 OFF
▷ DIP S/W : 3 ON
▷ DIP S/W : 4 OFF (All of the Car except Cayenne)
▷ DIP S/W : 5 OFF
▷ DIP S/W : 6 OFF
▷ DIP S/W : 7 ON (enable CVBS4)
▷ DIP S/W : 8 OFF
* Caution
- If the displayed screen vibrates, please try to operate
Dip S/W No. 6 after turning power off.
7
Advertisement
Table of Contents
