Drive Information; Odometer; Trip Meter; Driving Range - Toyota Avanza Owner's Manual

74
2. Instrument cluster

Drive information

Odometer

■
Displays the total distance the vehicle has been driven.

Trip meter

■
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
Pressing and holding the display change button will reset the trip meter
that is currently displayed.
Average fuel consumption (if equipped)
■
Displays the average rate of fuel consumption since the function
was last reset.
• The function can be reset by pressing and holding the display change
button when the average fuel consumption is displayed. Also, continu-
ing to press the button will change the display units.
• Use the displayed average fuel consumption as a reference.
Driving range (if equipped)
■
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining.
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch to the "LOCK" position.
If the vehicle is refueled without turning the engine switch to the "LOCK"
position, the display may not be updated.
Eco Driving Indicator Light customization
■
Eco Driving Indicator Light can be activated or deactivated by
pressing and holding the display change button when the Eco Driv-
ing Indicator Light customization display is displayed.
To change the Eco Driving Indicator Light customization display, press
and hold the display change button until the display changes.
AVANZA_OM_General_OMBZ214