Pentair NOCCHI FCD20 PVM 5-5 F Manual page 25

CORRESPONDING TO THE PRESSURE VALUE THAT THE GROUP WILL MAINTAIN IN THE DELIVERY COLLECTOR
By using the combination of keys
At the end of the operation the following message will be displayed:
STOP THRESHOLD
Bar 05.0
CORRESPONDING TO THE PRESSURE VALUE OF THE LAST PUMP - NORMALLY IS SET TO A VALUE OF 0.5 BAR AT THE SET
POINT PRESSURE
By using the combination of keys
At the end of the operation the following message will be displayed:
PROGR. MENU
TEMP. KICK STOP
To exit from the programming mode press several times key (19)
By pressing key (17)
M
A
set the pressure parameter at the value desired.
ENTE R
set the pressure parameter at the value desired.
ENTE R
the unit will begin to function in AUTOMATIC
GB
21