Download Print this page

Siemens OpenAir G Series Manual page 4

Damper actuator modbus rtu

Advertisement

Push-button addressing
Display current address (digits in reverse order)
The Modbus address can be set without a separate tool by using the push-button and LED.
To display the current address, press button <1s.
Colors
1-digits:
Example for address 124:
Set new address (digits in reverse order)
1. Enter addressing mode: press button > 1s until LED shines red, then release button
2. Enter digits: press button n-times à LED flashes per button press (feedback).
3. Store digits: press button until LED shines in color of following digits – release button,
4. Save address: press button until LED shines
5. Entered address is repeated one times for confirmation.
Note: If button is released before LED shines red, the address is discarded.
Examples
Set address "124":
1. Enter addressing mode
2. Set 1-digits: Press button 4-times à LED flashes
3. Store 1-digits: press button until LED shines
4. Set 10-digits: Press button 2-times à LED flashes
5. Store 10-digits: press button until LED shines
6. Set 100-digits: Press button 1-times à LED flashes
7. Store address: press button until LED shines
Set address "50":
1. Enter addressing mode
2. Skip 1-digits: Hold button pressed until LED shines
3. Set 10-digits: Press button 5-times à LED flashes
4. Store address (skip 100-digits): hold button pressed until LED shines
Set address "5":
1. Enter addressing mode
2. Set 1-digits: Press button 5-times à LED flashes
3. Store address: press button until LED shines
4 / 12
Siemens
Smart Infrastructure
red
10-digits:
LED
Note
The address is entered and shown in reverse order.
(before LED gets dark).
Colors: 1-digits:
red
/ 10-digits:
An address can be stored at any time, i.e. after setting the 1-digits, or after setting the 1-
and the 10-digits.
à address is stored and displayed 1x for confirmation
– release button
à address is stored and displayed 1x for confirmation
à address is stored and displayed 1x for confirmation
green
100-digits:
green
/ 100-digits:
(confirmation) à release button.
red
red
green
orange
red
– release button
green
red
orange
orange
per button press
– release button
green
per button press
– release button
orange
per button press
green
– release button
green
per button press
red
per button press
A6V10881141_en--_c
2019-04-25

Advertisement

loading

This manual is also suitable for:

Openair gdb111.1e/moOpenair glb111.1e/mo