Advertisement
HMI (Human-Machine Interface)
For more detailed explanations on device states, functions and error display, cf. product
documentation CE1Z4634
Push-button operation
Activity
Display current address
(in reverse order)
Enter Modbus address with push-button Press button > 1s and < 5s
Enter push-button addressing mode
(for use with Climatix
Reset to factory settings
LED colors and patterns
Color
Green
Orange / green
Orange
Orange
Red
Resetting the device by push button
The damper actuators can be reset by push-button:
1. Press button for >10s à LED starts flashing
2. Release button while LED still flashes à LED keeps flashing for 3s
3. If the button is pressed within these 3s, the reset is cancelled.
4. After those 3s à LED shines
1)
Related documents such as environmental declarations, CE declarations, etc., can be
downloaded at the following Internet address:
http://siemens.com/bt/download
A6V10881141_en--_c
2019-04-25
1)
.
Push-button operation
Press button < 1s
Press button > 5s and < 10s
TM
controllers)
Press button > 10s
Pattern
Description
steady
Start-up
1s on / 5s off
Fault free operation ("life pulse")
flashing
Bus traffic
1s orange / 1s green
Device is in override control
1s on / 1 off
Bus parameters not yet configured
1s on / 5s off
Backup mode entered
Steady
Mechanical fault / device jammed
1s on / 5s off
Internal error
0.1s on / 1s off
Invalid configuration, e.g. Min = Max
red
(reset), then
Confirmation
Current address is displayed
See description next page
LED shines orange (release
button when red LED gets
dark). Timeout after 1 min.
LED flashes orange
orange
green
(start-up).
3 / 12
Siemens
Smart Infrastructure
Advertisement
