Advertisement
Step
Function
3
Normal operation
Configuration required
4
Operating notes
Usability concept
Multi-page display
with navigation
3 lines of information
8 / 14
Siemens
Building Technologies
Description
After startup, the device goes to normal operation
(example view; picture depends on application in room automation
station).
Operation and display of the room operator unit depend on the control program on
the room automation station.
The display has 4 lines to display information.
Texts, icons, read-only data point information, or operable data point information
can be displayed.
With a multi-page navigation-driven page set, the information usually is laid out in
the following format:
Line 1
Title/read-only data point information
Line 2
Information
Operable data point information (display or setpoint)
Temperature, air quality, fan speed, etc.
Line 3
Read-only / operable data point information
Line 4
Information or navigation between several "pages"
Info
Operable
Read-only
Navigation
List operation
QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link
When configuration is faulty, the default page
"Initial Menu" is displayed: temperature that is
measured by the local temperature sensor along
with a menu for network commissioning and
diagnostics.
Info
Operable
Navigation
Single-line operation
Info
Operable
Navigation
CM2N1601en_04
2016-03-24
Advertisement
