Advertisement
Mounting
Dismounting
Siemens
Building Technologies
• The base plate contains:
– A hook to attach a securing strap to protect against tampering
(the strap is not provided)
– An earthing plate (quick slide connector) to connect an earthing cable
• The installing tube must be sealed or cold or warm air may enter the conduit box
and cause faulty temperature readings by the internal sensor.
• Mounting instructions are printed inside the device package and are also on the
plastic bag.
The operator unit may need to be dismounted from the base plate to exchange the
operator unit.
QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link
Hold bezel with one hand.
1.
Pull operator unit with the other hand.
2.
5 / 14
CM2N1601en_04
2016-03-24
Advertisement
