Griddle; Installing - Whirlpool RC8700ED Use And Care Manual

Griddle

Installing

You can install a griddle accessory on the
left basin of your cooktop (and in the right
basin of model RC8700ED). To use this
accessory you must have grill accessory Part
Number RCM20DB. To get the griddle
accessory, order Part Number RCM40DB
from a Whirlpool service company or dealer
(see Step 2 on page 38) or call the Whirlpool
Consumer Assistance Center toll-free
1-800-253-1301.
1. Make sure the grill element and grill-
rocks are installed and the control knobs
are turned off.
Handle
Basin pan
2. If grill element is not installed, place
the two grill-rocks into an empty basin
pan. The grill-rock handles must run
parallel to the front of the cooktop. You
have to use the grill-rocks because they
hold up the grill element.
30
Terminal
receptacle
Position the grill element with the termi-
nal plug towards the terminal receptacle.
Slide the element towards the receptacle
until the terminal plug is all the way inside
Grill-rock
it. The grill element should rest on the
handles of the grill-rocks.
NOTE:
Drain holes
3. Place the griddle over the grill element so
that the drain holes are in front. This will
let extra grease collect in the drain jar.
NOTE:
make contact with the top of the grill
element.
Do not use the grill grates.
The bottom of the griddle should
Terminal plug