Coil Elements; Installing - Whirlpool RC8700ED Use And Care Manual

Coil Elements

Installing

You can install extra coil elements in the left
basin (Model RC8720ED) or both basins
(Model RC8700ED) of your cooktop. To get
the coil element accessory, order Part
Number RCM10DB/DQ from a Whirlpool
service company or dealer (see Step 2 on
page 38) or call the Whirlpool Consumer
Assistance Center toll-free 1-800-253-1301.
To install:
1. Make sure the control knobs are
turned off.
2. If the grill grates, element, and grill-rocks
are in place, remove them before install-
ing coil elements. Clean out any grease
that may be in the basin. (See page 24
for more information.)
3. Position the accessory terminal plug
towards the terminal receptacle.
4. Slide the accessory towards the recep-
tacle until the terminal plug is firmly set in
receptacle.
5. Lower the opposite end of the accessory
into the cooktop until it is flush with the
Terminal
surface.
receptacle
Terminal
plug
Terminal
receptacle
Terminal
continued on next page
plug
9