Pioneer VREC-DH200 Owner's Manual page 18

Rear windscreen wiring example
CAUTION
Ensure care is taken so that power cables are not caught in the door when routeing these.
Note
• If the length is insufficient, then use a commercially available cigarette socket extension cable.
5 Rotate the ball joint adjustment bolt to adjust the lens angle.
Notes
• Adjust the lens angle while confirming the video on the exclusive app. If you are unable to confirm
the video on the exclusive app, adjust while using the angle confirmation guidelines.
→" Troubleshooting"
• Take your time when adjusting the angle.
• A protective film is applied to the lens when the product is purchased. Peel off this film.
Power cable
This product
Turn the ball joint
adjustment bolt to adjust.
− 18 −