General; Configuration Setup - LG LV640S-Z Installation Manual

12
INSTALLATION MENU

GENERAL

Configuration Setup

Select RCU
- It is a mode to set whether to use Select RCU or not. When 'Select RCU' is set to 'Enable' , You can adjust 'Number of RCU'
menu.
Number of RCU
- It is a mode to set Number of RCU.
Number of RCU value range 1~9. (When 'Select RCU' is set to 'Enable')
Number of RCU value range 0. (When 'Select RCU' is set to 'Disable')
* RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV.
One Channel Map
- If 'One Channel Map' is 'Enable' , the TV will operate as below.
• A. When the TV is auto-scanning, it searches air, cable and satellite channels.
•
• B. User can assign a channel number him/herself by manual scan.
•
• C. In 'Programme Edit' window, all channels are shown in a single list regardless of input source.
•
• D. Automatically scanned channels may not have the user-desired channel numbers.
•
- If user change the 'Enable/Disable' value, an pop-up window will be displayed to warn that all channel
information will be deleted. The Default value is 'Enable' .
DTV Programme Update
- It is a mode to set whether to update DTV programme automatically or not.
When DTV Programme Update is set to 'Auto' , the function to update TV's programme map according to dtv programme's
stream information.
DTV Programme Update is set to 'Manual' , the function to keep TV's programme map even though DTV programme's
information is changed.