Table of Contents
Advertisement
Quick Links
: Depending on model /
Típusfüggő / In base al modello / Zależnie od modelu / Dependendo do modelo / În funcţie de model / В зависимости от модели / U zavisnosti od modela /
Ovisno o modelu / Odvisno od modela / En función del modelo / Modele bağlı olarak değişkenlik gösterebilir / Залежно від моделі
www.lg.com
/ В зависимост от модела / Závisí na modelu / Selon le modèle / Abhängig vom Modell / Ανάλογα με το μοντέλο /
LV762*
X 2
24LV762*
X 1
AAA
28LV762*
LED TV
LV762*
LV662*
Advertisement
Table of Contents
Related Manuals for LG LV762 Series
Summary of Contents for LG LV762 Series
- Page 1 Típusfüggő / In base al modello / Zależnie od modelu / Dependendo do modelo / În funcţie de model / В зависимости от модели / U zavisnosti od modela / Ovisno o modelu / Odvisno od modela / En función del modelo / Modele bağlı olarak değişkenlik gösterebilir / Залежно від моделі www.lg.com...
- Page 3 ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN H/P OUT CLOCK...
- Page 4 CLOCK Satellite IN OPTICAL DIGITAL AUDIO OUT...
- Page 5 AV IN COMPONENT IN VIDEO L/MONO AUDIO R AUDIO VIDEO...
- Page 6 HDMI-DVI IN AV IN HDMI IN AUDIO OUT DVI OUT...
- Page 8 24LV762V-ZA 343.1 53.1 28LV762V-ZA 641.5 395.8 57.6 4.85 32LV762V-ZC 79.4 43LV762V-ZC 1107 79.4 11.3 49LV762V-ZC 1241 63.0 16.3 55LV762V-ZC...
- Page 9 43LV662H-ZC 80.8 49LV662H-ZC 1110 81.1 11.3...
- Page 10 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *SAC35974182* Copyright © 2019 LG Electronics Inc. All Rights Reserved.
- Page 11 Warning! Safety instructions • Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture. •...
- Page 12 • Only use an authorized AC adapter and power cord approved by There is a danger of combustion/explosion or fire due to careless LG Electronics. Otherwise, this may result in fire, electric shock, handling of the inflammable substances. malfunction or product deformation.
- Page 13 • Signal from Remote Control can be interrupted due to external/ • As long as this unit is connected to the AC wall outlet, it is not internal lighting eg Sunlight, fluorescent lighting. If this occurs turn disconnected from the AC power source even if you turn off this off lighting or darken viewing area.
- Page 14 Preparing • How to use the ferrite core (Only 24/28LV76**) - Use the ferrite core to reduce the electromagnetic interference in the power cord or component jack. Wind the power cord on the • If the TV is turned on for the first time after it was shipped from ferrite core once.
-
Page 15: Lifting And Moving The Tv
Lifting and moving the TV • Do not use any unapproved items to ensure the safety and product life span. • Any damage or injuries caused by using unapproved Please note the following advice to prevent the TV from being scratched items are not covered by the warranty. -
Page 16: Using The Button
Using the button Basic functions <A/B type> (Depending on model) Power On (Press) You can simply operate the TV functions, using the button. Power Off (Press and hold) <A type> Volume Control Programmes Control <C type> Power On (Press) Power Off (Press and Hold) Menu Control (Press Menu Selection (Press and Hold... -
Page 17: Mounting On A Table
Mounting on a table Attaching the TV to a desk (This feature is not available for all models.) (Depending on model) The TV should be attached to a desk so it cannot be pulled in a forward/ 1 Lift and tilt the TV into its upright position on a table. backward direction, potentially causing injury or damaging the product. -
Page 18: Using The Kensington Security System
LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. -
Page 19: Separate Purchase (Wall Mounting Bracket)
Separate purchase (Wall mounting bracket) • When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending on model) 43UV76** 43UV66** 49/55UV76** 32/43LV76** 49/55UV66** Model 43LV66** 49/55LV76**... -
Page 20: Connections (Notifications)
Connections (notifications) Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). Connect various external devices to the TV and switch input modes to • Use a signal splitter to use more than 2 TVs. select an external device. -
Page 21: Speaker Output Setup
Speaker output setup Method of volume control port (Depending on model) (Depending on model) • Cable Spec. Each Up / Down pin is pulled to 3.3 V with CPU GPIO. EXTERNAL GND / UP / DOWN SPEAKER OUT CPU detects transition STEREO from 3.3 V to GND level (8 ) -
Page 22: Network Setup
Network setup Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Wired network connection Some separate cable is not provided. (Depending on model) •... -
Page 23: Remote Control
Remote control (POWER) Turns the TV on or off. Adjusts the brightness of the screen to reduce energy consumption. (Some buttons and services may not be provided depending on models By zooming in on the selected or regions.) area, you can view it in full screen. (Except for 24/28LV761*) Changes the input source. - Page 24 (Depending on model) (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. Recalls your preferred subtitle in digital mode. Not functional. Resizes an image. (INPUT) Changes the input source. Number buttons Enters numbers. Alphabet buttons Enters letters. Accesses the saved programmes list.
-
Page 25: Open Source Software Notice Information
Dolby Laboratories. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. -
Page 26: Specifications
• SuperSign Software & Manual or green) at a size of 1 ppm on the panel. This does not indicate a - Visit the LG Electronics website (http://partner.lge.com) and malfunction and does not affect the performance and reliability of download the latest software for your model. - Page 27 CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % (Depending on country) Digital TV Analogue TV...
- Page 28 HDMI/DVI-DTV supported mode HDMI/DVI-PC supported Mode • PC audio is not supported. Horizontal Vertical Resolution • Use HDMI IN 1 for PC mode (Depending on model) Frequency (Hz) Frequency (kHz) 31.46 59.94 Horizontal Vertical Resolution 640 x 480 Frequency (kHz) Frequency (Hz) 31.50 60.00...
-
Page 29: Audio Format
Component port connecting Audio format information File Item Info Component ports on the TV Format Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz .mp3 Support MPEG1, MPEG2 Video output ports on DVD player channels mono, stereo Bit rate Sample freq. -
Page 30: Video Codec
Video codec Extension Codec VC-1 Advanced Profile (except for Video WMVA), VC-1 Simple and Main Profiles .asf .wmv WMA Standard (except for WMA v1/ Audio WMA Speech) Xvid (except 3 warp-point GMC), H.264/ Video AVC, Motion Jpeg, MPEG-4 .avi MPEG-1 Layer I, II, MPEG-1 Layer III Audio (MP3), Dolby Digital, LPCM, ADPCM, DTS Video... - Page 31 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
- Page 32 IR CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) (Power On/Off) Remote control Button / Remote control Button Remote control Button / Remote control Button 43 Remote control Button (Q. Settings) Remote control Button (BACK) Remote control Button Remote control Button (INPUT) Remote control Button Remote control Button Remote control Button Number Key 0-9 Remote control Button Alphabet buttons 10-19 ...
-
Page 33: External Control Device Setup
EXTERNAL CONTROL DEVICE Phone jack Type (TV) (PC) SETUP (Depending on model) RS-232C IN (CONTROL & SERVICE) (PC) (TV) • You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual. RS-232C Setup (PC) (TV) * For other models, connect to the USB port. * The connection interface may differ from your TV. • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control (PC) (TV) (TV) (PC) device (such as a computer or an A/V control system) to control the RS-232C IN (CONTROL & SERVICE) product’s functions externally. -
Page 34: Communication Parameters
RS-232C Configurations Command Reference List (Depending on model) 7-Wire Configurations (Standard RS-232C cable) DATA COMMAND1 COMMAND2 (Hexadecimal) PC 01. Power 00 to 01 2 3 02. Aspect Ratio (See p. 4) 3 2 03. Screen Mute (See p. 5) 5 5 04. Volume 4 6 ... -
Page 35: Transmission / Receiving Protocol
Transmission / Receiving Protocol 01. Power (Command: k a) ►To control Power On/Off of the set. (Depending on Model) Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On [Command 1] : First command to control the TV. (j, k, m or x) [a][ ][Set ID][ ][OK/NG][Data][x] [Command 2] : Second command to control the TV. ►To Show TV is Power On/Off. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID Transmission ‘0’ , every connected set is controlled. Set ID is indicated as decimal (1 [k][a][ ][Set ID][ ][FF][Cr] to 99) on menu and as Hexa decimal (0 x 0 to 0 x 63) on transmission/ receiving protocol. [Data] : To transmit command data. Transmit ‘ FF’ data to read status of [a][ ][Set ID][ ][OK/NG][Data][x] command. [Cr] : Carriage Return * Similarly, if other functions transmit ‘0 x FF’ data based on this for- mat, Acknowledgement data feed back presents status about each ... - Page 36 03. Screen Mute (Command: k d) 06. Contrast (Command: k g) ►To select screen mute on/off. ►To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][d][ ][Set ID][ ][Data][Cr] Transmission [k][g][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Video mute off Data Min : 00 to Max : 64 01 : Screen mute on (Picture off) * Refer to Real data mapping 10 : Video mute on [g][ ][Set ID][ ][OK/NG][Data][x] [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). 07. Brightness (Command: k h) But, in case of Screen mute on, TV will not display OSD. ►To adjust screen brightness. You can also adjust brightness in the PICTURE menu. 04. Volume Mute (Command: k e) Transmission ►To control volume mute on/off. [k][h][ ][Set ID][ ][Data][Cr] You can also adjust mute using the MUTE button on remote control. Data Min : 00 to Max : 64 Transmission * Refer to Real data mapping [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off) [h][ ][Set ID][ ][OK/NG][Data][x]...
- Page 37 09. Tint (Command: k j) 12. Remote Control Lock Mode (Command: k m) ►To adjust the screen tint. ►To lock the front panel controls on the monitor and remote control. You can also adjust tint in the PICTURE menu. Transmission [k][m][ ][Set ID][ ][Data][Cr] Transmission [k][j][ ][Set ID][ ][Data][Cr] Data 00 : Lock off 01 : Lock on Data Red : 00 to Green : 64 * Refer to Real data mapping [m][ ][Set ID][ ][OK/NG][Data][x] [j][ ][Set ID][ ][OK/NG][Data][x] * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released. * In the standby mode, if key lock is on, TV will not turn on by power 10. Sharpness (Command: k k) on key of IR & Local Key. ►To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. 13. Balance (Command: k t) ►To adjust balance. Transmission You can also adjust balance in the AUDIO menu. [k][k][ ][Set ID][ ][Data][Cr] Transmission Data Min : 00 to Max : 32 [k][t][ ][Set ID][ ][Data][Cr] * ...
- Page 38 15. Energy Saving (Command: j q) 17. Equalize (Command : j v) ►To reduce the power consumption of the TV. You can also adjust ►To adjust equalize. Energy Saving in PICTURE menu. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Power Saving MSB LSB Level Function Description Data Low Frequency Power 7 6 5 Frequency 4 3 2 1 0 Step Low Minimum Power 0 0 0 1st Band 0 0 0 0 0 0(decimal) Low ...
-
Page 39: External Input
22. Input select (Command: x b) Channel data range Min : 00 Max : 270F (0 to 9999) (Main Picture Input) ►To select input source for main picture. Transmission [a][ ][Set ID][ ][OK/NG][Data][x] [x][b][ ][Set ID][ ][Data][Cr] 19. Programme Add/Skip (Command: m b) Data Structure ►To set skip status for the current Programme. MSB LSB Transmission [m][b][ ][Set ID][ ][Data][Cr] External Input Input Number Data 00 : Skip 01 : Add External Input Data [b][ ][Set ID][ ][OK/NG][Data][x] Analogue 20. Key (Command: m c) Component ►To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] HDMI Data IR CODES [c][ ][Set ID][ ][OK/NG][Data][x] Input Number Data Input1 21. ... - Page 40 * Real data mapping 00 : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE : Step 254 FF : Step 255...