Subscribe to Our Youtube Channel
Related Manuals for LG LV30 Z Series
Summary of Contents for LG LV30 Z Series
- Page 1 INSTALLATION MANUAL LED TV* Please read this manual carefully before operating your set and retain it for future reference. LV30**-Z/T/G* LV34**-Z/T/G* LV54**-Z/T/G*...
-
Page 2: Table Of Contents
EZ-Manager Wizard - Automatically for Setup (USB Configuration) EZ-Manager Wizard - Manually for Setup NETWORK SETUP INSTALLATION MENU PRO:CENTRIC Introduction LG Hotel Mode Setup POWER SAVING TV MANAGER 1. USB - USB Cloning CLOCK SETUP - Receive From USB - Send To USB... -
Page 3: Ez Manager
EZ MANAGER EZ MANAGER (*Only for LV5**H, LV3**H series) EZ-Manager 2.1 - Introduction The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain “procentric.local” and IP Server Address are needed to be registered in DNS TV will contact the IP Server using the default Domain “procentric.local”... -
Page 4: Ez-Manager Wizard - Automatically For Setup
EZ-MANAGER WIZARD / EZ-MANAGER WIZARD EZ-Manager Wizard - Automatically for Setup y Image shown may differ from your TV. Select a Label and/or enter the Room Number using the numeric keypad on the remotes. To continue, move and Next select ‘ ’. -
Page 5: Ez-Manager Wizard - Automatically For Setup (Usb Configuration)
[ TV Software Version ] [TLL] GlobalClone00001.TLL Current : 02.00.00.01 EPK : 02.00.00.01 [LOGO] 1360X768.jpg [ Forced Update Option ] [EPK] M1A_DVB_CN_RevNo1901_V02.0... SPI Boot LG Boot Logo Apply Previous Downloading the software/jpeg/TLL files takes few minutes. After the installation is completed, turn off. -
Page 6: Ez-Manager Wizard - Manually For Setup
EZ-MANAGER WIZARD EZ-Manager Wizard - Manually for Setup y Image shown may differ from your TV. Select a Label and/or enter the Room Number using the numeric keypad on the remotes. To continue, move and select ‘Next’. Please select the ‘Manual Pro:Centric’. Select the Pro:Centric Mode “Configuration Only”, “GEM”... - Page 7 EZ-MANAGER WIZARD Downloading the Pro:Centric application files takes few minutes. After the installation is completed, the following screen will be displayed.
-
Page 8: Installation Menu
The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’. The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators. -
Page 9: Lg Hotel Mode Setup
S/W : 02.00.00.01 Micom : 0.00.84 Previous Use the button to select the LG Hotel Mode Setup. Use the OK button and then button to select Hotel Mode Operation. *When ‘Hotel Mode Operation’ is set to Yes(Work), all functions of Hotel Mode apply. - Page 10 Operation’ and ‘Local Key Operation’ will be worked by below. - IR Operation Decide whether work the LG remote control or not. y Able to set Normal, Use PWR Only, Block All. y When ‘IR Operation’ is set to Block All, all normal remote keys don’t work. Use PWR Only (Block except power) makes block all remote keys except power key.
- Page 11 INSTALLATION MENU • Power On Status • Power On Status ◄ ► ◄ ► • Key Operation • Key Operation ◄ ► ◄ ► • IR Operation • IR Operation Block All Block All ◄ ► ◄ ► • Local Key Operation •...
- Page 12 INSTALLATION MENU - System Provider Mode - ‘System Provider Mode’ allows access to the menu system from the front panel or remote control but access is controlled as follows: y When value is ‘Yes’, Accessible Items on the menu system, others are not permissible. »...
- Page 13 INSTALLATION MENU - Aspect Ratio The aspect ratio determines the default aspect ratio that the set returns to on power up. y The modes are as follows: » Aspect ratio = “Disable(0)” stays at previous state, same as consumer model. »...
- Page 14 INSTALLATION MENU Public Display Settings / LG Hotel Mode Setup (Value Range Table) Item Enable Disable Initail Hotel Mode Operation Power On Status *STD Volume Start Volume Off, Minimum Volume ~ Maximum Volume Maximum Volume Minimum Volume ~ 100 Minimum Volume...
-
Page 15: Tv Manager
Plug USB memory card into the USB port of the TV. Use the button to select the TV Manager option and then press the OK button. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Set ID Setup... - Page 16 Select the EPK option (software update) and then use the green and yellow buttons to download either SPI Boot or LG Boot Logo. If you checked the LG Boot Logo checkbox, then the Splash image, if selected, will be unchecked. Also, if you select the LG Boot Logo and proceed with the download, the existing Splash image will be deleted.
-
Page 17: Usb Cloning
TV MANAGER USB Cloning An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Public Display Mode Installation Menu settings, User A/V settings and the Channel Map. This newer procedure significantly decreases the installation time that would be necessary if the standard RS-232C method were used instead. -
Page 18: Receive From Usb
Plug USB memory card into the USB port of the TV. Use the button to select the TV Manager option and then press the OK button. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Set ID Setup... -
Page 19: Send To Usb
Plug USB memory card into the USB port of the TV. Use the button to select the TV Manager option and then press the OK button. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Set ID Setup... -
Page 20: Logo Image Download
ANTENNA/ Use the button to select the TV Manager option and then press the OK button. CABLE IN Installation Menu (V 3.0) C IN LG Hotel Mode Setup SERVICE) TV Manager Password Change Set ID Setup Configuration Setup Time Scheduler... -
Page 21: Diagnostics Setup
It checks and records good and bad channel signals, and then provides the signal information to a USB storage device in XML file format. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change TV Manager... - Page 22 TV MANAGER Overview Diagnostics 1. It provides status information of the TV and information about the current input in XML file format. (There are two kinds of information. There is information which is extracted regardless of the model, such as the model name or boot version, and there is information which is available depending on the model, such as the micom version, PTC version, etc.).
-
Page 23: Password Change
Image shown may differ from your TV. - The changed password is applied to the ‘extra contents’ password. (*Only for LV5**H, LV3**H series) Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Password Change Set ID Setup... -
Page 24: Configuration Setup
CONFIGURATION SETUP CONFIGURATION SETUP y Image shown may differ from your TV. Installation Menu (V 3.0) Configuration Setup LG Hotel Mode Setup TV Manager Number of RCU Password Change Splash Offset Time ◄ ► Set ID Setup USB Auto Playback... - Page 25 The video signal will be transmitted through HDMI to be displayed on the screen in standard quality. Screen Saver Cube y When ‘Screen Saver Cube’ is set to ‘No’, TV will do not display LG Screen Cube. One Channel Map y If 'One Channel Map' is 'YES', the TV will operate as below.
-
Page 26: Time Scheduler
"Instant on" supported models: - If "Instant on" of Configuration Setup is enable(Reset mode or Mute Mode), USB Auto Playback can't be used. TIME SCHEDULER Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Time Scheduler Set ID Setup Time Scheduler ◄... -
Page 27: Lock Mode
LOCK MODE LOCK MODE Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Lock Mode Password Change Set ID Setup Enable Data Service ◄ ► Configuration Setup Enable ◄ ► Time Scheduler Enable Factory Reset ◄ ► Lock Mode... -
Page 28: Speaker Output Setup
SPEAKER OUTPUT SETUP Volume Control y Selects the volume control method of an external speaker. You can choose either Ext/Int Variable or y Fixed. Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 1 Watts. Int variable is linked to the main volume OSD and change the volume 0 - 1 Watts. - Page 29 SPEAKER OUTPUT SETUP NOTE External speaker must be used three plug(SE : Single Ended, Stereo) as shown in the drawings and external speaker fully inserted with external Speaker Jack. Otherwise it will cause defect. Use only with the 3 Pole 3.5 mm Stereo Jack. Do not connect your headphones or earphones to the port for connecting an external speaker.
-
Page 30: Hcec Setup
HCEC SETUP HCEC SETUP Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager HCEC Setup Password Change Default CEC Mode Set ID Setup ◄ ► Configuration Setup IR Decoding Time Scheduler Device ID Lock Mode StandBy External Speaker Forced Initialize... -
Page 31: Insert Image
S/W : 00.02.00.01 Micom : 0.00.32 y This feature allows you to display an image you have stored on the TV instead of the LG Cube when there is no signal due to DTV signal attenuation, external device failure, or cable removal. -
Page 32: Welcome Video
WELCOME VIDEO WELCOME VIDEO Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Welcome Video Password Change Set ID Setup Welcome Video ◄ ► Configuration Setup Video Reset Confirm Time Scheduler Lock Mode Previous External Speaker HCEC Setup Insert Image Welcome Video S/W : 00.02.00.01 Micom : 0.00.32... -
Page 33: Crestron
CRESTRON CRESTRON (* This feature is not available for all models.) y Image shown may differ from your TV. y This function enables synchronization with applications provided by Crestron. Installation Menu (V 3.0) Public Display Settings TV Manager Crestron Password Change Set ID Setup Server Configuration Setup... -
Page 34: Home Menu
HOME MENU HOME MENU (* Only for LV5**H, LV3**H, LV340C-T* series) y Feature that provides Hotel Templates and a Quick Menu. Home Menu Setting y Home Menu Can be set to Enable or Disable. If set to Enable, the sub-items are activated. Press the Q.MENU key to access the Hotel Home Menu Launcher. - Page 35 HOME MENU Home Menu Launcher y To enter : Press the Q.MENU key. y Item Sleep Timer : Sets a sleep timer. (Operates in sync with General -> Timers -> Sleep Timer.) Channel (Program) List : Navigates to the Channel List if the current input is TV. (Operates the same UI as the existing LIST hotkey.) Hotel Information : Shows the items configured in Installation ->...
-
Page 36: Network Setup
NETWORK SETUP NETWORK SETUP (* Only for LV5**H series) y Image shown may differ from your TV. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Network Setup Password Change Set ID Setup Network Setting Press OK Configuration Setup... -
Page 37: Pro:centric
PRO:CENTRIC PRO:CENTRIC (* Only for LV5**H, LV3**H series) y Image shown may differ from your TV. Installation Menu (V 3.0) LG Hotel Mode Setup Pro:Centric TV Manager Mode Flash Password Change ◄ ► WORF Set ID Setup Configuration Setup Room Number Setting... -
Page 38: Power Saving
POWER SAVING P:C IP Setting (* Only for LV54** series) y It can be set using the < > button or number buttons. - (IP a) : Sets the first number in the IPv4 address. - (IP b) : Sets the second number in the IPv4 address. - (IP c) : Sets the third number in the IPv4 address. -
Page 39: Clock Setup
CLOCK SETUP CLOCK SETUP (* Except for LV3**C series) y Image shown may differ from your TV. Installation Menu (V 3.0) Clock Setup ▲ Clock Display ◄ ► Set ID Setup Dimming Standby Configuration Setup Dimming PowerOn Time Scheduler Lock Mode Clock Source External Speaker Input... -
Page 40: Download Extra Contents
DOWNLOAD EXTRA CONTENTS DOWNLOAD EXTRA CONTENTS (* Only for LV5**H, LV3**H series) Download Extra Contents(flash file) toTV set y The Pro:Centric application can be downloaded to your TV. FLASH ( * .SWF) / GEM supporting file An SWF file complied with Flash Lite 3.0 or earlier (the 3.0 version is recommended) •... - Page 41 DOWNLOAD EXTRA CONTENTS Continue to replace ‘Extra Contents’ with one in USB memory? Select ‘Yes’. Wait till the download process is completed. After completion of download, TV set will restart automatically. TV is in updating process. Please wait for a while. You can see a new Application File on TV.
-
Page 42: Ir Codes
IR CODES IR CODES • This feature is not available for all models. Code Function Note Code Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button... -
Page 43: External Control Device Setup
EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE Type of Connector : D-Sub 9-Pin Male SETUP RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. - Page 44 EXTERNAL CONTROL DEVICE SETUP RS-232C Configurations Set ID Set ID number. “Real Data Mapping”. 7-Wire Configurations (Standard RS-232C cable) Press (SETTINGS) to access the main menus. Press the Navigation buttons to scroll to GENERAL and press OK. Press the Navigation buttons to scroll to Set ID and press OK. Scroll left or right to select a set ID number and select Close.
- Page 45 If not use the remote-controller with data formats recommended, IR output signals will be suppressed automatically by IR receiver. In this case, LG does not guarantee IR working function. To make sure of this matter, here are two methods as below.
-
Page 46: Command Reference List
EXTERNAL CONTROL DEVICE SETUP Command Reference List Transmission / Receiving Protocol (Depending on model) (Depending on Model) DATA COMMAND1 COMMAND2 (Hexadecimal) Transmission 01. Power 00 to 01 [Command1][Command2][ ][Set ID][ ][Data][Cr] 02. Aspect Ratio (See p. 47) 03. Screen Mute (See p. - Page 47 EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) 03. Screen Mute (Command: k d) ► To control Power On/Off of the set. ► To select screen mute on/off. Transmission Transmission [k][d][ ][Set ID][ ][Data][Cr] [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Data 00 : Power Off 01 : Power On Video mute off...
- Page 48 EXTERNAL CONTROL DEVICE SETUP 05. Volume Control (Command: k f) 08. Colour (Command: k i) ► To adjust volume. ► To adjust the screen Colour. ► You can also adjust volume with the volume buttons on remote control. You can also adjust colour in the PICTURE menu. Transmission Transmission [k][f][ ][Set ID][ ][Data][Cr]...
-
Page 49: Function Description
EXTERNAL CONTROL DEVICE SETUP 12. Remote Control Lock Mode (Command: k m) 15. Energy Saving (Command: j q) ► To lock the front panel controls on the monitor and remote control. ► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu. - Page 50 EXTERNAL CONTROL DEVICE SETUP Channel data range 17. Equalize (Command : j v) ► To adjust equalize. Min : 00 Max : 270F (0 to 9999) Transmission [a][ ][Set ID][ ][OK/NG][Data][x] [j][v][ ][Set ID][ ][Data][Cr] 19. Programme Add/Skip (Command: m b) ►...
- Page 51 EXTERNAL CONTROL DEVICE SETUP 22. Input select (Command: x b) * Real data mapping (Main Picture Input) 00 : Step 0 ► To select input source for main picture. Step 10 (Set ID 10) Transmission [x][b][ ][Set ID][ ][Data][Cr] Step 15 (Set ID 15) Data Structure 10 :...
Need help?
Do you have a question about the LV30 Z Series and is the answer not in the manual?
Questions and answers