Fault-Finding And Rectification; Repair / Replacement Of Swivel Castor - Dietz Tomtar TSU-2 User Manual

18 07 INSTRUCTIONS FOR GENERAL USE
What
Check entire commode
chair
for dirt

FAULT-FINDING AND RECTIFICATION

What
The commode chair does not move
in a straight line.
The commode chair is hard to push.
Brake function is insufficient and
uneven.
Squeaking and grinding noises

REPAIR / REPLACEMENT OF SWIVEL CASTOR

Only to be performed by specialist staff:
1. Loosen the screw connection of the swivel castor on the frame tube with a 10 mm open-end span-
ner and 4 mm Allen key.
2. Pull the swivel castor out by the wheel fork, downwards and out of the frame tube, and insert the
new castor. Finally, screw the new swivel castor to the frame tube.
DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN
Description
• The seat and toilet pail are to be cleaned and disinfected
after every use.
• Depending on how dirty it is, but at least once a month,
the entire commode chair must be cleaned (see chapter
"Cleaning and disinfection").
Possible causes
• The swivel castor axles are dirty.
• The swivel castors are worn out or
damaged.
• The swivel castors cannot rotate freely.
• The swivel castor axles are dirty.
• The fork of the swivel castors is damaged
or the swivel castor suspension is no longer
properly attached.
• The locking brakes are damaged.
• The locking brakes are damaged.
• Various causes
monthly
before using
x
x
Measures
Remove the dirt
Visit an authorised
specialist dealer
Remove the dirt
Visit an authorised
specialist dealer
Visit an authorised
specialist dealer
Visit an authorised
specialist dealer