Table of Contents
Advertisement
16
07 INSTRUCTIONS FOR GENERAL USE
SERVICING / MAINTENANCE
We recommend performing the inspections listed in the maintenance schedule at regular intervals to
ensure that the commode chair is always safe to use.
Failure to ensure care and maintenance or insufficient care and maintenance of the commode chair
leads to a restriction of liability. The maintenance schedule does not provide any information on the
amount of work that will actually need to be performed on the commode chair.
NOTE
As the user, you will be the first to notice any
damage. If you notice a fault as described in the
maintenance schedule or further defects and
functional impairments, contact an authorised
specialist dealer immediately.
WARNING
Repairs on the commode chair must only be per-
formed by specialist shops using DIETZ original
spare parts to maintain the operational safety of
the commode chair. The relevant spare parts cat-
alogue can be found on our website in the infor-
mation of the product in question.
TOOLS FOR TSU-2 / TSU-4
Tools are required for some of the individual setting tasks and checks on the TSU-2/-4:
Hexagon/open-end spanner (13, 10, 8 mm)
t
Allen key (5 & 4 mm)
t
Phillips screwdriver
t
DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN
NOTE
The inspections and measures stipulated in the
maintenance schedule must be performed by the
user or assistant if not otherwise stated.
NOTE FOR SPECIALIST DEALERS:
If the user reports abnormalities on the com-
mode chair, please check all the inspection points
listed in the maintenance schedule. The checks
must also be performed before putting the
wheelchair back into operation and after longer
storage periods (> 4 months).
Advertisement
Table of Contents
