Transport; Accessories And Add-Ons From External Suppliers - Dietz Tomtar TSU-2 User Manual

Universal commode chair
Table of Contents

Advertisement

After use:
1. To empty the pail, pull it out carefully towards
the rear.
2. After emptying, clean/disinfect the pail and
seat as instructed.
3. Replace the seat cushion.
WARNING
Risk of trapping: Do not insert the pail or
pull it out while a person is still sitting on the
commode chair.

4.5 Transport

The commode chair is not a device for fre-
quent transport. Should it be necessary to
transport the chair, we recommend disassem-
bling it according above assembly instruc-
tions in reverse. The chair should be packed
such that it is in a stable position and there is
no danger of sudden and dangerous move-
ments in the means of transport.
If you have to carry the assembled commode
chair, we recommend that you remove the
footrests before lifting the commode chair by
using both sides of the frame.
WARNING
Risk of injury: Never lift the commode chair
by the footrest supports or the leg rests.
04 USING THE COMMODE CHAIR
4.6 Accessories and add-ons from
external suppliers
In general only original accessories from DIETZ
may be used. If third-party products are in-
stalled on the wheelchair, responsibility for the
safety of the product passes to the person who
installs the accessories or carries out the instal-
lation. The compliance of the combination of
accessories or add-on and product is then new,
and must be declared by the person who
attaches it. The compliance declared by DIETZ
according to MDR 2017/745, Annex II expires.
WARNING
Safety hazard: Should add-ons or accessories
that are not sold by DIETZ are used, the safety of
the product can not be guaranteed.
If accessories or add-ons are added to the com-
mode chair, then the safety instructions in the
operating instructions for the accessories or add-
ons must be observed.
11
EN
EN
FR
IT
NL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tomtar tsu-4

Table of Contents