User Mode - Electro-Harmonix Pitch Fork+ Manual

Polyphonic pitch-shifter/harmony pedal
Table of Contents

Advertisement

USER Mode – The user programmable footswitch can be assigned to
control different parameters or augment certain features.
1XF2
For BLND,
will behave like a pseudo expression pedal. The crossfade rate for these
modes is set within the RISE and FALL sub-menus under MOME in
LATCH mode. When using one of these five USER modes, the BYPASS
footswitch changes to LATCH mode, even if MOME is currently selected.
When the USER footswitch is assigned to control frequency or volume,
that function is disabled for use with the EXP jack. Also, USER 1XS2 takes
precedence over EXP's FREQ 1XS2.
AUXO.
output
precedence over BYPS settings within AUX.
SHF1
– Will toggle SHIFT 1 channel's ON/OFF
SHF2
– Will toggle SHIFT 2 channel's ON/OFF
JUMP.
When the USER footswitch is pressed, preset will jump to and
load the selected slot if a valid preset is selected. Any number of
presets can be chained together. These preset chains can then be
closed to create a loop of presets that are cycled through with
each press of the USER footswitch. See page 10 on how to setup
a preset chain with JUMP.
HOLD
glissando (glide) occurs at a programmed rate when BYPASS is
pressed. When USER is set to HOLD and the USER footswitch is
pressed, during a glissando sweep, the glissando pitch is held at
the point when the USER footswitch was pressed. Releasing the
USER footswitch continues the glissando cycle.
BLND
1XF2
– Crossfade from SHIFT 1 to SHIFT 2
1X2D
D1X2
1XS2
– Cross-shift and crossfade SHIFT1 to SHIFT 2
1X2D
D1X2
,
,
– Toggles the AUX Output. Press VALUE to enter the Aux
control
sub-menu.
BYP
– Will toggle between the input signal and the AUX
output setting
MUTE
– Will mute the AUX output when USER is toggled
OFF
– Turn VALUE to choose a preset slot ranging from 1-100.
– If momentary (MOME.) is selected in LATCH mode, a
– Blends from DRY to both SHIFT channels
– Crossfade from SHIFT 1 to SHIFT 2 with DRY control
– Crossfade from SHIFT 1 with DRY control to SHIFT 2
1XS2
and
, holding down the footswitch
When
selected,
9
AUXO
takes

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pitch Fork+ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Products for Electro-Harmonix Pitch Fork+

Table of Contents