If You Need Service; If You Need Assistance - Whirlpool Freestanding Gas Range Installation Instructions Manual

For cleaning and
maintenance...
If removing the range is necessary for
cleaning or maintenance, disconnect the
electric supply.
If electrical supply is inaccessible, lift the
range slightly at the front and pull the
range away from the wall. Pull the range
out only as far as necessary to
disconnect the electrical supply line.
Remove the range to complete cleaning
or maintenance.
Move range back into operating position.
Remove drawer. Level the range.
Reconnect the electrical supply. Make
sure that left rear leveling leg is engaged
in the anti-tip bracket.
If range does not
operate:
Check that the circuit breaker is not
tripped or the house fuse blown.
Check that the power supply cord is
plugged into the outlet.
Check that gas line is turned on.
See Use and Care Guide for
troubleshooting list.
NOTE: Refer to Use and Care Guide for
operating and cleaning instructions.

If you need assistance:

If you have questions about operating,
cleaning or maintaining your range:
Refer to Use and Care Guide.
Call the Customer Interaction Center.
Check your Use and Care Guide for
a toll-free number to call or call the
dealer from whom you purchased
this appliance. The dealer is listed in
the Yellow Pages of your phone
directory under "Appliances —
Household — Major — Service and
Repair. "

If you need service:

Maintain the quality built into your range
by calling an authorized service
company.
To obtain the name and number of the
authorized service company:
Contact the dealer from whom you
purchased your range; or
Look in the Yellow Pages of your
telephone directory under
"Appliances — Household —
Major — Service and Repair;" or
Call the Customer Interaction Center.
The toll-free number is listed in your
Use and Care Guide.
When you call, you will need:
The range model number.
The range serial number.
Both numbers are listed on the
model/serial rating plate located on the
frame behind the broiler door.
11