Using The Air Purifier; Understanding The Air Quality Light; Installing The Filter; Connecting Power - Philips AC0830/10 User Manual

3

Using the air purifier

Understanding the air quality light

The color of air quality light corresponds to the ambient air quality�
The brightness of air quality light reflects the current running mode�
PM2�5 level
≤12
13-35
36-55
>55

Installing the filter

Remove all packaging of the filter before use�
Note: Make sure the air purifier is unplugged from the electrical outlet before installing the
filter�
1
Rotate the base anti-clockwise to remove it from the appliance (fig c)�
2
Pull the filter out from the appliance (fig d)�
3
Remove all packaging materials of the air purification filter (fig e)�
4
Put the filter back into the appliance (fig f)�
5
Reattach the base and rotate it clockwise to fasten the base (fig g)�

Connecting power

Note: Risk of electric shock! When you unplug the AC power cord, always pull the plug from
the socket� Never pull the cord (fig h)�
Connect the power adapter to:
• First, the power socket on the appliance�
• Then, the wall outlet�

Turning on and off

Note: For optimum purification performance, close doors and windows�
1
Press the power button
» The air purifier operates in the auto mode by default�
2
Press the power
Air quality light color
Blue
Blue-purple
Purple-red
Red
on the back of the air purifier to switch on�
button again to switch off the air purifier�
Air quality level
Good
Fair
Poor
Very poor
EN
5