Subscribe to Our Youtube Channel
Related Manuals for PBteen ROWAN OVERHEAD BRIDGE
Summary of Contents for PBteen ROWAN OVERHEAD BRIDGE
- Page 1 ROWAN OVERHEAD BRIDGE ASSEMBLY INSTRUCTIONS Date: 2015-April-14 www.pbteen.com Page 1 of 6...
- Page 2 (E) Metal Washer (2mm) (F) Allen Key (M6 x 20mm) (G) Metal Bracket (H) Sleeve Nut (I) Allen Bolts (J) Drill Bit ø9mm (M6 x 30mm) 1 set Tools Required (not included): Philips Head Screwdriver www.pbteen.com Page 2 of 6...
- Page 3 Before attaching the bridge to the 2 tower bookcases, make sure the 2 holes on the upper side of Tower Bookcase (sold separately) are drilled through with the ø9mm Drill Bit (J) supplied as shown below. www.pbteen.com Page 3 of 6...
- Page 4 Nuts (H) on the inside of the Bridge (A) and Bolts (I) on the inside of the Bookcase Towers. Tighten with 2 pcs Allen Keys (F) as shown below. Insert bolts (C), Spring Washer (D), Metal Washer (E) into holes Metal Bracket (G). Tighten with Allen Key (F), as shown below. www.pbteen.com Page 4 of 6...
- Page 5 Anchors (E). Make sure the Tower Bookcase is securely fastened to the wall. Note: The Tower Bookcase can be adjusted in and out, and up and down (slightly) by loosening the bolt/screws, making your adjustment, and securely. Re-tightening all bolts and screws. www.pbteen.com Page 5 of 6...
- Page 6 We do not recommend the use of chemical cleaners, abrasives or furniture polish on our Lacquered finish. • Hardware may loosen over time. Periodically check to make sure all connections are tight. • Re-tighten if necessary. www.pbteen.com Page 6 of 6...
Need help?
Do you have a question about the ROWAN OVERHEAD BRIDGE and is the answer not in the manual?
Questions and answers