Sony MDR-AS700BT Reference Manual

Wireless
Reference Guide
Stereo Headset
MDR-AS700BT
©2013 Sony Corporation Printed in China
http://www.sony.net/
English
WARNING
To reduce the risk of electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
Do not install the appliance in a confined space, such as a bookcase or built-in
cabinet.
Do not expose the batteries (battery pack or batteries installed) to excessive
heat such as sunshine, fire or the like for a long time.
The BlueTooTh word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Sony Corporation is under license.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the
united States and in other countries.
Microsoft, Windows and Windows Vista are registered trademarks or trademarks
of Microsoft Corporation in the united States and/or other countries.
Macintosh and Mac oS are trademarks of Apple Inc., registered in the u.S. and
other countries.
other trademarks and trade names are those of their respective owners.
Location of the nameplate
The nameplate is placed as shown below.
Serial number label
Nameplate label
Earpad
Precautions
On BLueTOOTh communication
ˎ BlueTooTh wireless technology operates within a range of about 10 meters.
Maximum communication range may vary depending on obstacles (human
body, metal, wall, etc.) or electromagnetic environment.
ˎ The antenna is built into the unit as illustrated in the dotted line. The sensitivity
of the BlueTooTh communication will improve by turning the direction of the
built-in antenna to the connected BlueTooTh device. The communication
distance shortens when the obstacles are between the antenna of the
connected device and this unit.
Location of
built-in
antenna
ˎ The following conditions may affect the sensitivity of BlueTooTh
communication.
ē There is an obstacle such as a human body, metal, or wall between this unit
and BlueTooTh device.
ē A device using 2.4 Ghz frequency, such as a wireless lAN device, cordless
telephone, or microwave oven, is in use near this unit.
ˎ Because BlueTooTh devices and wireless lAN (Ieee802.11b/g) use the same
frequency, microwave interference may occur and resulting in communication
speed deterioration, noise, or invalid connection if this unit is used near a
wireless lAN device. In such a case, perform the following.
ē use this unit at least 10 m away from the wireless lAN device.
ē If this unit is used within 10 m of a wireless lAN device, turn off the wireless
lAN device.
ē Install this unit and BlueTooTh device as near to each other as possible.
ˎ Microwaves emitting from a BlueTooTh device may affect the operation of
electronic medical devices. Turn off this unit and other BlueTooTh devices in
the following locations, as it may cause an accident:
ē where inflammable gas is present, in a hospital, train, airplane, or a petrol
station
ē near automatic doors or a fire alarm
ˎ This unit supports security capabilities that comply with the BlueTooTh
standard to provide a secure connection when the BlueTooTh wireless
technology is used, but security may not be enough depending on the setting.
Be careful when communicating using BlueTooTh wireless technology.
ˎ We do not take any responsibility for the leakage of information during
BlueTooTh communication.
4-465-169-32(1)
ˎ Connection with all BlueTooTh devices cannot be guaranteed.
ē A device featuring BlueTooTh function is required to conform to the
BlueTooTh standard specified by Bluetooth SIG, Inc. and be authenticated.
ē even if the connected device conforms to the above mentioned BlueTooTh
standard, some devices may not be connected or work correctly, depending
on the features or specifications of the device.
ē While talking on the phone hands free, noise may occur, depending on the
device or communication environment.
ˎ Depending on the device to be connected, it may require some time to start
communication.
GB
On charging the unit
ˎ This unit can be charged using uSB only. Personal computer with uSB port is
CT
required for charging.
ˎ The unit does not work during charging.
KR
On the splash-proof feature
ˎ The unit has the splash-proof feature and is protected against water splashing
from any direction. however, because the unit cannot be used in water, note
the following cautions.
ē Make sure that the uSB jack cover is closed when you use the unit.
ē Do not use the unit in a humid place such as a bathroom or sauna.
ē In case the unit gets wet, wipe it with a dry cloth and leave the unit until it
gets dry before using.
If you cannot operate the unit
ˎ Set the unit in charging status, then press the
simultaneously. The unit will be reset. Pairing information is not deleted.
POWER button
VOL – button
ˎ If you are still unable to operate the unit even after the resetting operation
above, initialize the unit as follows.
Turn off the unit by pressing the
Then, hold the PoWeR button down for more than 15 seconds. The
indicator (blue) flashes 4 times, and the unit is reset to the factory settings. All
pairing information is deleted.
Others
ˎ Do not place this unit in a place exposed to humidity, dust, soot or steam,
subject to direct sunlight, or in a car waiting at a traffic signal. It may cause a
malfunction.
ˎ using the BlueTooTh device may not function on mobile phones, depending
on radio wave conditions and location where the equipment is being used.
ˎ If you experience discomfort after using the BlueTooTh device, stop using the
BlueTooTh device immediately. Should any problem persist, consult your
nearest Sony dealer.
ˎ listening with this unit at high volume may affect your hearing. For traffic
safety, do not use this unit while driving or cycling.
ˎ Do not put weight or pressure on this unit as it may cause the unit to deform
during long storage.
ˎ Do not subject the unit to excessive shock.
ˎ Clean the unit with a soft dry cloth.
ˎ The earpads may deteriorate due to longterm storage or use.
ˎ If you have any questions or problems concerning this unit that are not
covered in this manual, please consult your nearest Sony dealer.
Specifications
General
Communication System: BlueTooTh Specification version 3.0
Output: BlueTooTh Specification Power Class 2
Maximum communication range: line of sight approx. 10 m
Frequency band: 2.4 Ghz band (2.4000 Ghz - 2.4835 Ghz)
Modulation method: FhSS
Compatible BLueTOOTh Profiles
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
hFP (hands-free Profile)
hSP (headset Profile)
Supported Codec : SBC
3)
Supported content protection method: SCMS-T
Transmission range (A2DP): 20 hz - 20,000 hz (Sampling frequency 44.1 khz)
Included items:
Wireless stereo headset (1)
Micro-uSB cable (approx. 50 cm) (1)
Reference Guide (this sheet) (1)
Quick Start Guide (1)
other documents (1 set)
The actual range will vary depending on factors such as obstacles between
1)
devices, magnetic fields around a microwave oven, static electricity, reception
sensitivity, antenna's performance, operating system, software application,
etc.
2) BlueTooTh standard profiles indicate the purpose of BlueTooTh
communication between devices.
3) Codec: Audio signal compression and conversion format
4) Subband Codec
5) Advanced Audio Coding
Wireless Stereo headset
Power source: DC 3.7 V: Built-in lithium-ion rechargeable battery
Mass: Approx. 80 g
Operating temperature: 0 °C to 40 °C
Rated power consumption: 1.4 W
usage hours:
Communication time (including music playback time): Max. 9 hours
Standby time: Max. 120 hours
Charging time:
Approx. 1.5 hours
Charging temperature: 5 °C to 35 °C
Receiver
Type: open air
Driver units: 30 mm
Frequency response: 10 hz - 24 khz
Microphone
Type: electret condenser
Direction characteristic: omni directional
effective frequency range: 100 hz – 4,000 hz
System requirements for battery charge using
uSB
Personal Computer with pre-installed with any of the following operating
systems and uSB port:
Operating Systems
(when using Windows)
®
Windows 8 / Windows
®
Windows 7
home Basic / home Premium / Professional / ultimate
®
Windows Vista (Service Pack 2 or later)
home Basic / home Premium / Business / ultimate
®
Windows XP (Service Pack 3 or later)
home edition / Professional / Media Center edition 2004 / Media Center edition
2005
(when using Macintosh)
Mac oS X (version.10.3 or later)
Design and specifications are subject to change without notice.
PoWeR and Vol – buttons
PoWeR button for more than 2 seconds.
1)
2) :
, AAC
4) 5)
®
8 Pro
繁體中文
警告
為減少觸電的危險，請勿打開裝置外殼。請只委託合格的人員進行維修。
請勿將本系統安放在書櫥或壁櫥等狹窄封閉處。
請勿將電池（安裝的電池組或電池）⾧時間暴露在如陽光或⽕源等類似過熱的地⽅。
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變
更頻率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信 ； 經發現有干擾現象時，
應立即停用，並改善至無干擾時⽅得繼續使用。前項合法通信，指依電信法規定作
業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射
性電機設備之干擾。
BLUETOOTH字樣與商標為Bluetooth SIG, Inc.所擁有 ； Sony Corporation針對此類
標示的使用已獲得授權。
N字標示為NFC Forum, Inc.在美國和其他國家的商標或註冊商標。
Microsoft、Windows及Windows Vista是Microsoft Corporation在美國及/或其他
國家的註冊商標或商標。
Macintosh和Mac OS是Apple Inc.在美國及其他國家的註冊商標。
其他商標和商標名稱為其各自所有人擁有。
銘牌位置
以下顯示銘牌位置。
序號標籤
銘牌標籤
耳墊
預防措施
關於BLUETOOTH通訊
ˎ BLUETOOTH無線技術的操作範圍約為10公尺。最大的通訊範圍可能會因障礙物（人
體、金屬、牆壁等） ，或電磁場環境而異。
ˎ 虛線表示本機內建的天線。BLUETOOTH通訊的靈敏度可藉由旋轉內建天線的⽅向
到所連接的BLUETOOTH裝置而獲得改善。若所連接的裝置的天線與本機之間有障
礙物時，通訊距離將縮短。
內建天線的
位置
ˎ 以下情況可能會影響BLUETOOTH通訊的靈敏度。
ē 本機與BLUETOOTH裝置之間具有障礙物，例如，人體、金屬或牆壁。
ē 在靠近本機的地⽅使用2.4 GHz頻率的裝置，例如，無線LAN裝置、無線電話或
微波爐等。
ˎ 由於BLUETOOTH裝置及無線LAN（IEEE802.11b/g）使用相同的頻率，如果在靠近
無線LAN裝置附近使用本裝置的話，可能會發生微波干擾並造成通迅速度衰減、
雜訊或連接無效。如果發生這種情況，請執行以下操作。
ē 在距離無線LAN裝置至少10 m遠的地⽅使用本機。
ē 如果在無線LAN裝置10 m以內的地⽅使用本機，請關閉無線LAN裝置。
ē 盡可能近地安裝本機與BLUETOOTH裝置。
ˎ 來自BLUETOOTH裝置所放射的微波會影響電子醫療設備的運作。在以下場所，請
關閉本機與其他BLUETOOTH裝置，因為這可能會造成意外 ：
ē 存在可燃性氣體的地⽅，在醫院、⽕車、飛機或加油站
ē 在接近自動門或⽕災警報器的地⽅
ˎ 本機支援符合BLUETOOTH標準的安全功能，可在使用BLUETOOTH無線技術時提供安
全的連線，但安全性可能有所不足，此需視設定而定。使用BLUETOOTH無線技術
通訊時，請務必小心。
ˎ 對於在BLUETOOTH通訊期間洩漏的資訊，我們概不負責。
ˎ 無法保證可與所有BLUETOOTH裝置連線。
ē 具備BLUETOOTH功能的裝置需要符合Bluetooth SIG, Inc.指定並獲得驗證的
BLUETOOTH規格。
ē 即使所連接的裝置符合上述BLUETOOTH標準，某些裝置也可能無法正確連接或
運作，這需視裝置的功能與規格而定。
ē 視裝置與通訊環境而定，以免持⽅式通話時，可能會出現噪音。
ˎ 視要連接的裝置而定，可能需要一點時間才能開始通訊。
關於為本機充電
ˎ 僅可使用USB為本機充電。需要帶有USB連接埠的個人電腦才能充電。
ˎ 本機在充電期間無法運作。
關於防潑水特性
ˎ 本機具備防潑水特性，可保護來自任何⽅向的潑水。但是因為本機無法在水中使
用，請注意以下事項。
ē 當您使用本機時，請確保USB插頭蓋已經合上。
ē 切勿在潮濕地點使用本機，例如，浴室或三溫暖。
ē 如果本機沾濕，請使用乾布擦拭，並等待其乾燥後再使用。
如果您無法操作本機
ˎ 設定本機操作狀態，然後同時按下 POWER與VOL -按鈕。本機將重設。不會刪
除配對資訊。
POWER按鈕
VOL -按鈕
ˎ 完成上述重設操作後，如果您還是無法操作本機，請依下列⽅式對本機進行初始
化。
按住 POWER按鈕超過2秒以關閉本機。然後， 往下按住
指示燈（藍色）將閃爍4次，此時本機將重設回出廠設定。所有配對資訊皆被刪
除。
其他
ˎ 切勿將本機放置在暴露於濕氣、灰塵、油煙或蒸汽的地⽅，或使其受陽光直射，
或在等待交通號誌的車內。這可能會造成故障。
ˎ 視無線電波條件以及使用設備的地點而定，在行動電話上使用的BLUETOOTH裝置
可能無法運作。
ˎ 如果您在使用BLUETOOTH裝置後感覺到不適，請立即停止使用BLUETOOTH裝置。如
果問題持續存在，請諮詢您最近的Sony經銷商。
ˎ 以高音量聆聽本機可能會影響您的聽力。基於交通安全，切勿在開車或騎車時使
用本機。
ˎ 切勿在本機上放置重物或施加壓力，因為這可能造成本機在⾧期存放後變形。
ˎ 切勿讓本機受到劇烈撞擊。
ˎ 請使用軟乾布清潔本機。
ˎ ⾧期存放或使用後，耳墊可能會褪色。
ˎ 如果您有任何本手冊中未涵蓋的與使用本機⽅面相關的疑問或問題，請諮詢您最
近的Sony經銷商。
POWER按鈕超過15秒。