Advertisement
Step 18
Assemble Roof Gables End Frames
1. The gable frames are shipped nested together. Remove hardware and other material placed
inside the frames. Separate these frames by removing screws. The screw bit is packaged in
the hardware bag.
Gable Center Frame
2. After the frames are separated select one of the
end frames and install a 31-3/4" long 2x4 (angle
cut both ends) across the top. Secure the 2x4
with 2-1/2" wood screws. The siding, installed
next, will securely hold all the 2x4s in place.
31-3/4" long 2x4
.
31-3/4" long 2x4
3. Repeat process to disassemble and install the top 2x4 on all (4) four gable frames.
.
Gable End Frame
Gable End Frame
Advertisement
