Advertisement
Step 9
Set Back & End Walls
1. Select the back wall panel marked 'BL' and one of the end wall panels. Install these panels
at the back corner. Secure wall panels together at the corners using (5) five 10d coated sinker
nails. Nail wall panels to the floor using 16d galvanized nails in every stud opening.
Panel
'BL'
4. Nail along the siding edge where the back wall panels overlap using 8d galv. box nails.
5. Set the front wall panels. Nail along the siding edge where the side wall panels overlap.
6.
Cut and remove the bottom 2x4 in the door openings.
Panel
'BR'
Nail Along
Siding Edge
Nail Along
Siding Edge
2. Use 2x4s from the pallet to hold
the wall straight.
3. Set the other back wall panel
and end wall panel. Nail wall
panels together using 10d coated
sinker nails. Nail where the
siding overlaps using 8d
galvanized box nails.
Nail Siding to
End Wall Stud
Use pallet 2x4s to hold the
front wall straight.
Nail Along
Siding Edge
Advertisement
