Turntable Operation - Ricatech RMC160 User Manual

21. Record Button
22. Function Selector
23. Volume Control
24. CD Door
25. Power Indicator
26. IR Sensor
27. Auto Stop (ON/OFF) Selector
28. Aux Line-Out output Socket
29. FM Antenna
30. AC Power Cord
FM TUNER ONLY
Operation
1. Set the Function Selector (22) to the Radio position.
2. Select the desired frequency band with FM / FM STEREO Selector (11).
3. Tune to the desired radio station by turning the Tuning control (10).
4. Adjust the volume (23) control to desired level.
5. To turn off the radio, set the Function Selector (22) to the Power OFF position.
Antenna
For FM Radio unwind the antenna Wire and move it around to obtain the best reception.
Your may have to alter the position of the unit to obtain the best reception.
FM Stereo and Mono Reception
When an FM signal is tuned in, stetting the FM / FM STEREO Selector (11) to FM ST. position will enable
the broadcasting to be received in stereo sound. The FM Stereo indicator (7) will appear on LCD display.

TURNTABLE OPERATION

Preparation
Open the Record Player Cover.
Release the Tone arm Clamp, and remove the stylus protector.
Listening to Records
1. Set the Function Selector (22) to the PHONO position.
2. Place a record on the turntable, over the central spindle. Place the EP adapter over the
central spindle when playing 17cm EP records.
3. Set the Speed Selector (5) to 33 or 45 or 78 rpm according to the record.
4. Release the tone m clamp, and remove the protective cap from the stylus.
5. Lift the Tone arm with the Tone arm Lift Lever.
6. Move the tone arm to the beginning of the record, or to the start of a particular track.
7. Gently lower the tone arm onto the record with the Tone arm Lift lever to start playing.
8. When the record is finished the tone arm will automatically stop. Lift the tone arm from
the record and return it to the rest .
9. To stop manually, lift the tone arm from the record and return it to the rest position.
Auto stop ON / OFF selector.
10.
function.
For EP 33 RPM – Switch to Auto stop "On" position - It enables the record to auto stop when ending.
For EP 45 or 78 RPM – Switch to Auto stop "Off" position, It can play the whole song.
Notes: Do not stop or turn the platter manually.
Moving or jarring the turntable without securing the Tone arm clamp could result in damage
to the Tone arm. Replace the protective cap on the stylus when not in use.
- Set the auto stop Selector (27) ,Switch to ON for turntable auto stop
5