Ricatech RMC160 User Manual page 9

BATTERY REPLACEMENT
When the remote control operation becomes unstable or
the distance from which remote control is possible
becomes shorter, replace the battery with a new one.
USING THE REMOTE CONTROL UNIT
• To use the remote control unit, point it at the remote sensor (26) and press the button gently.
Remote control range is approximatley 5m (approx. 16FT). Since the remote control range is less when the
unit is used at an angle, use directly in front
of the remote sensor.
• Do not expose the remote sensor to strong light (direct sunlight or artificial lighting) and
make sure that there are no obstacles between the remote sensor and the remote
control unit.
The Stylus Replacement
Loosen the red part of the stylus by screw driver
and take out as per diagram A and B
Replace the new stylus as per C and D diagram
THE ABOVE DIAGRAM IS ONLY SHOWING HOW TO REPLACE A NEW NEEDLE/STYLUS.
(EXTRA STYLUS/NEEDLE IS NOT INCLUDED).
SPECIFICATIONS
Power Supply
AC 230V ~ 50Hz
Power consumption : 25W
Radio Frequency Coverage
FM: 87.5 - 108 MHz
9