Turntable Operation; Playing A Record; Accessory Supplied; Cd Player Operation - Ricatech RMC240 User Manual

TURNTABLE OPERATION

Preparing to use the Turntable
1. Lift up the Record Player Lid, untwist and remove the black tie-wrap securing the TONE ARM.
2. Remove any packing materials.
3. Remove the white protective NEEDLE COVER by gently pulling it off the red stylus holder towards the front of the unit.
Keep this safe and re-fit to the stylus in case the unit needs transporting to a different location.
4. Release the TONE ARM HOLD-DOWN CLIP by gently pushing this to the right. This will unlock the tone arm from
its ARM REST. Re-lock the hold-down clip when moving the unit to another location.

PLAYING A RECORD

1. Switch the unit ON by turning the power ON-OFF SWITCH/VOLUME CONTROL switch to the ON position.
2. Turn the VOLUME control to mid-range position.
3. Slide the FUNCTION Switch to PHONO mode.
4. Set the SPEED CONTROL SWITCH to the correct speed (33 1 / 3 , 45 or 78 rpm) required for the selected record.
5. Use the CUE LEVER to raise the tone arm off its rest. Move the tone arm gently to the right until a ‗click' is heard,
the turntable should start rotating.
6. Move the Tone Arm towards the record and use the cue lever to lower it onto the point where you want the record to
start playing.
7. At the end of the record, the TONE ARM will stop automatically. Lift the Tone Arm and return it manually to the
TONE ARM REST.

ACCESSORY SUPPLIED -

To play a 45rpm record with the centre clip missing, remove the adaptor from the record player deck
by placing thumb & forefinger in the recesses and pulling it upwards, then place it on the Turntable
Spindle. The record can then be placed on the turntable.

CD PLAYER OPERATION

Playing a CD
1. Switch the unit ON by turning the power ON-OFF SWITCH/VOLUME CONTROL switch to the ON position and turn
the Sound Volume to mid-range position.
2. Slide the FUNCTION Switch to CD mode.
3. Press CD OPEN / CLOSE /
4. Insert a pre-recorded compact disc with the printed side facing up. Press CD OPEN / CLOSE /
the compartment, ― READ ― is displayed as the CD player scans the contents of the disc.
5. Track no. 1 will start playing back automatically after the CD Player has finished reading the contents of the disc.
6. Press FORWARD SKIP /
on the display.
or the ― STOP/SD/USB ― key (marked with a red dot) to stop playback.
7. Press
or the ― PLAY/PAUSE ― key (marked with a green dot) to resume play or pause the music.
8. Press
MP3-CD Disc Playback – by Remote Control
1. Insert an MP3-CD format disc.
displayed as the CD Player scans the contents of the disc.
2. Track no. 1 in the Root Folder (Folder 1) will start playing back automatically after the MP3-CD disc contents has
been read.
Spindle Adaptor for 45 rpm records
to open the CD Compartment.
or BACKWARD SKIP /
Press CD OPEN / CLOSE /
once or repeatedly until the desired track number appears
again to close the compartment. ― READ ― is
again to close