Alienware Area-51 Service Manual page 84

Advanced
Power Management Setup
AC Recovery
Deep Sleep Control
Chipset
Spread Spectrum
CPU Base Clock (MHz)
Adjust CPU Base Clock Strap
Ring Ratio
DRAM Frequency
DRAM Timing Mode
CPU Ratio
CPU Ratio Mode
Overvoltage Configuration
Memory voltage (24h OUT1)
Memory voltage (26h OUT1)
DMI and Uncore voltage (2Ah OUT1)
CPU VCCIN
Advanced DRAM Configuration
Command Rate
tCL
tRCD
tRP
tRAS
tRFC
tREFI
tWR
tWTR
tRRD
tRTP
84
Sets what action the computer takes when power is restored.
Default: Last State.
Allows you to define the controls when Deep Sleep is enabled.
Default: Enabled in S5 Only.
Enabling this option could reduce the EMI. Default:
Enabled.
Base clock for CPU. Default: 100.00.
Allows you to adjust the CPU Base Clock Strap. Default:
Auto.
Allows you to change the Ring Ratio mode. Default: Auto.
Allows you to adjust the DRAM frequency. Default: Auto.
Allows you to change the memory timing mode. Default:
Auto.
Allows you to adjust the CPU ratio. Default: Auto.
Allows you to change the CPU Ratio mode. Default:
Dynamic Mode.
Allows you to access the Overvoltage Configuration
submenu.
Adjusts the memory voltage. Default: 0.
Adjusts the memory voltage. Default: 0.
2Ah OUT1. Default: 0.
2Ah OUT2. Default: 1.8 V.
Allows you to change the Advance DRAM Configuration.
Default: Disabled.
Displays the Command Rate (editable in Manual Mode).
Displays the Column Address Strobe Latency (editable in
Manual Mode).
Displays timing of RAS to CAS delay (editable in Manual
Mode).
Displays timing of RAS Precharge (editable in Manual
Mode).
Displays timing of Row Address Strobe (editable in Manual
Mode).
Displays timing of Refresh to Archive/Refresh cycle time
(editable in Manual Mode).
Displays timing of Refresh Intervals (editable in Manual
Mode).
Displays timing of Write Recover (editable in Manual
Mode).
Displays Write to Read Delay (editable in Manual Mode).
Displays RAS to RAS delay (editable in Manual Mode).
Displays Read to Precharge Command Delay (editable in
Manual Mode).