Table of Contents
Advertisement
Chipset
CPU Ring Voltage Offset Mode
CPU Ring Voltage Offset
CPU SA Voltage Mode
CPU SA Voltage
CPU SA Voltage Offset Mode
CPU SA Voltage Offset
Load Level 1 OC Settings
Load Level 2 OC Settings
Security
Supervisor Password
User Password
Set Supervisor Password
Boot
Boot Configuration
Bootup Numlock State
Wait for 'F1' If Error
Secure Boot Control
Load Legacy OPROM
Set Boot Priority
Boot Mode
USB Boot Support
1st Boot
2nd Boot
3rd Boot
4th Boot
86
Allows you to change the CPU Ring Voltage Offset Mode.
Default: Auto.
Allows you to change the CPU Ring Voltage Offset.
Default: Auto.
Allows you to change the CPU System Agent Voltage
Mode. Default: Manual Mode.
Allows you to change the CPU System Agent Voltage.
Default: Auto.
Allows you to change the CPU System Agent Voltage
Offset Mode. Default: Auto.
Allows you to change the CPU System Agent Voltage
Offset. Default: Auto.
Allows you to select OC Level Profile 1.
Allows you to select OC Level Profile 2
Displays the supervisor password.
Displays the user password.
Allows you to set, change, or delete the supervisor password.
The supervisor password controls access to the system setup
utility.
NOTE: Deleting the supervisor password deletes the
user password. Set the supervisor password before
setting the user password.
Allows you to set the status of the Num Lock key during
boot On or Off . Default: On.
Allows you to enable or disable the F1 screen. Default: All,
but KB.
Allows you to enable or disable the secure boot control.
Default: Disabled.
Default: Enabled.
Allows you to enable or disable USB Boot support. Default:
Legacy.
Allows you to enable or disable USB Boot support. Default:
Enabled.
Allows you to enable or disable the 1st boot device.
Default: Hard Disk.
Allows you to enable or disable the 2nd boot device.
Default: USB Hard Disk.
Allows you to enable or disable the 3rd boot device.
Default: CD/DVD.
Allows you to enable or disable the 4th boot device.
Default: Floppy.
Advertisement
Table of Contents
