Overview; Brief Introduction; Feature; Application - Ebyte E810-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,LTD

1. Overview

1.1 Brief Introduction

E810-DTU (CAN-RS485) is a small intelligent protocol converter developed by
Chengdu Ebyte Electronic Technology Co., Ltd. It is with 8V ~ 28V of power supply,
integrating 1 channel CAN-BUS interface and 1 channel RS485 interface to realize
bidirectional conversion between different protocol data from RS485 and CAN. It supports
serial command configuration device parameters and working mode, and there are four data
conversion modes available: transparent conversion, transparent band information conversion,
protocol conversion, and Modbus RTU conversion. At the same time, E810-DTU (CAN-
RS485) intelligent protocol converter has the characteristics of small size and convenient
installation. It has high cost performance in CAN-BUS product development and data
analysis applications. It is reliable assistant for engineering application, project debugging and product development.

1.2 Feature

Bidirectional conversion of data between RS485 and CAN is available.

Transparent conversion, transparent band information conversion and protocol conversion are available.

Modbus RTU protocol conversion is available.

Support two CAN identifier transmission methods, which can be specified by fixed configuration or serial frame data.

Parameter setting via RS485 is available.

Parameter setting via RS485 is between 1200~115200.

Parameter setting via software is available.

Factory setting reset via software and hardware is available.

With power indicator, status indicator, etc.


1.3 Application

Industrial control and other CAN-BUS networks

Automobile and railway equipment networking

Security and fire protection network

Underground remote communication

Public address system

Parking equipment control

Smart home, smart building

Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd.
E810-DTU(CAN-RS485) User Manual
4