At+Modbusid Inquire/Set Modbus Id; At+Mode Inquire/Set Operating Mode; At+Mid Inquire Device Name - Ebyte E810-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,LTD
ON turn on echo, echo inputted command in AT command
OFF turn off echo，command is not echoed in AT command
Example：AT+E=ON<CR>

5.5.6 AT+MODBUSID inquire/set MODBUS ID

Function：inquire/set MODBUS ID
Format：inquire
Transmit: AT+ AT+MODBUSID <CR>
Return: <CR><LF>+OK=<id><CR><LF>
Set
Transmit: AT+ AT+MODBUSID =<id><CR>
Return: <CR><LF>+OK<CR><LF>
Parameter：
id: MODBUS ID range：0-255
Example：AT+MODBUSID=9 <CR>

5.5.7 AT+MODE inquire/set operating mode

Function：inquire/set operating mode
Format：inquire
Set
Parameter：
Mode： operating mode 4 in total：
TRANS transparent transmission mode
TPRTL transparent tape information mode
MODBUS MODBUS mode
PROTOL protocol mode
Example： AT+MODE=TRANS <CR>

5.5.8 AT+MID inquire device name

Function：inquire module name
Format：inquire
Transmit: AT+MID<CR>
Return: <CR><LF>+OK=<name><CR><LF>
Parameter：name module name
Example：AT+MID=E810-TTL<CR>
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd.
Transmit: AT+MODE <CR>
Return: <CR><LF>+OK=<mode><CR><LF>
Transmit: AT+MODE =<mode><CR>
Return: <CR><LF>+OK<CR><LF>
E810-DTU(CAN-RS485) User Manual
25