Can Connection Method; Mode Introduction; Operating Mode; Data Conversion Method - Ebyte E810-DTU User Manual
Intelligent protocol converter can-rs485
Hide thumbs
Also See for E810-DTU:
- User manual (55 pages) ,
- User manual (34 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,LTD
3.3.2 CAN connection method
4 Mode introduction
4.1 Operating mode
There are two modes for E810-DTU(CAN-RS485)，normal and parameter setting mode.
Mode
Normal mode
Setting mode
4.2 Data conversion mode
There are four data conversion modes for E810-DTU(CAN-RS485) ： Transparent conversion, transparent band information
conversion, protocol conversion and MODBUS conversion. Bidirectional conversion between CAN and RS485 is available.
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd.
The general mode of the device is normal mode, and it works
normally when it is powered on.
The device can be configured in the mode. For details on how to
enter the configuration mode, see Chapter 5.
Data conversion mode
Transparent conversion
Transparent band information
conversion
Protocol conversion
MODBUS conversion
Function
Conversion direction
Bidirectional conversion between CAN
and RS485
Bidirectional conversion between CAN
and RS485
Bidirectional conversion between CAN
and RS485
Bidirectional conversion between CAN
and RS485
E810-DTU(CAN-RS485) User Manual
10
Advertisement
Table of Contents
