Overview; Brief Introduction; Features; Application - Ebyte E104-BT05 User Manual

Chengdu Ebyte Electronic Technology Co., Ltd

1. Overview

1.1 Brief Introduction

E104-BT05 is a serial-to-BLE Bluetooth slave module based on
Bluetooth protocol version 4.2. It features with small size, low power
consumption and works in 2.4GHz band.
E104-BT05 module is based on TLSR8266 chip, which uses AT
commands to set parameters, and it is easy and fast to operate. The
module only supports Bluetooth slave mode. The module supports low
power broadcast, data transparent
port level reading, IO port level setting and variable frequency PWM
output.
Modules can be widely used in intelligent wearable device, home automation, home security, personal health care,
Smart home appliance, accessories and remote control, automobile, lighting, industrial Internet, intelligent data
acquisition, intelligent control etc. Maximum support baud rate 256000bps data transmission.

1.2 Features

 Support Bluetooth BLE 4.2 Protocol;
 Support adjustable Bluetooth packet length;
 Support 3 operating modes: configuration, transparent transmission and sleep mode;
 Support boot-up automatic broadcasting, automatic connection;
 Support Beacon and IBeacon broadcast;
 Support UART wake-up function;
 Support MAC address binding;
 Support serial port transparent transmission;
 Support multiple serial mode and baud rate;
 Support custom 16-bit UUID and 128-bit UUID;
 PCB board antenna without external antenna;
 Support Bluetooth parameter configuration over air;
 Maximum communication distance is: 75m;
 Support ultra-low power sleep, synchronous broadcasting;
 Support IO port level reading (new features);
 Support IO port level output (new features);
 Support PWM output (new features) .

1.3 Application

 Wireless Sensor for Meter Reading
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd
transmission, air configuration, IO
E104-BT05 User Manual
4