Table of Contents
Advertisement
ST743A/ST744A/ST748A
Cable structure
Prepare a cable based on the following configuration diagram.
■For the linear servo motor
Servo amplifier
CN2
For the signal adjustment and confirmation, connect the following equipment.
Personal
Software for
computer
signal adjustment
Conditions
When using an optional encoder
cable
When fabricating an encoder cable
*1 These items should be prepared by the customer.
*2 In order to adjust and check signals when installing the ST743A, ST744A, or ST748A, a personal computer, signal adjustment software,
and a converter unit are required. For further details, contact Mitutoyo.
Encoder cable
(1)
(2)
Conversion unit
Encoder cable
(1) Options manufactured by Mitutoyo
Part No.06ACF117A: 5 m
Part No.06ACF117B: 10 m
(2) MR-J3CN2 connector set
Page 12 Encoder cable
1.3 Linear encoder manufactured by Mitutoyo (absolute position type)
Linear encoder
ST743A/ST744A/ST748A
Head cable
(3)
*2
*1
*1
(3) Junction connector
15-pin D-SUB (female)
Shell: HDAB-15S
Plug case: HDA-CTH (Hirose
Electric)
Head cable
Linear encoder accessory
Cable length: 1 m
1 LINEAR ENCODER
1
11
Advertisement
Table of Contents
