JVC KW-AVX810 Instructions Manual page 81

Symptoms
• "No Disc" appears on the screen.
• "No Magazine" appears on the screen.
• "Cannot play this disc Check the disc"
appears on the screen.
• "Reset08" appears on the screen.
• "Reset01" – "Reset07" appears on the screen. Press the reset button of the CD changer.
• The CD changer does not work at all.
• "No DAB Signal" appears on the screen.
• "Reset 08" appears on the screen.
• The DAB tuner does not work at all.
• "Antenna Power NG" appears on the screen.
• The iPod does not turn on or does not work.
• Sound is distorted.
• "Disconnect" appears on the screen.
• Playback stops.
• "No Files" appears on the screen.
• "Reset01" – "Reset07" appears on the
screen.
• "Reset08" appears on the screen.
• The iPod's controls do not work after
disconnecting from this unit.
• "Restricted Device" appears on the screen.
• No operations are available when playing
back a track containing artwork.
• No picture appears on the screen.
• Playback picture is not clear and legible.
Remedies/Causes
Insert a disc into the magazine.
Insert the magazine.
Current disc does not include playable files. Replace the disc
with one including playable files.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
Reset the unit. (☞ page 3)
Move to an area with stronger signals.
Connect this unit and the DAB tuner correctly, then reset
the unit. (☞ page 3)
Connect this unit and the DAB tuner correctly, then reset
the unit. (☞ page 3)
Check the cords and connections.
• Check the connection.
• Charge the battery.
Deactivate the equalizer either on this unit or the iPod.
Check the connection.
The headphones are disconnected during playback. Restart
playback.
No tracks are stored. Import tracks to the iPod.
Disconnect the adapter from both this unit and iPod. Then,
connect them again.
Check the connection between the adapter and this unit.
Reset the iPod.
Check whether the connected iPod is compatible with this
unit. (☞ page 74)
Operate the unit after the artwork is loaded. (☞ page 74)
• Turn on the video component if it is not on.
• Connect the video component correctly.
Adjust items in <Picture Adjust> menu. (☞ page 60)
81
REFERENCES